Long Description:As a cover for ABB-free@home® sensor units (e.g. 6221/2.0) and sensor/actuator units (e.g. 6211/2). As cover for KNX 4gang push-button coupling unit (6108/07).
Long Description:As a cover for ABB-free@home® sensor units (e.g. 6221/2.0) and sensor/actuator units (e.g. 6211/2). As cover for KNX 4gang push-button coupling unit (6108/07).
Catalog Description:RTC-F-1.PB Room thermostat, Sensors, room temperature controllers, movement detector, fan coils
Long Description:Heating/cooling operation. Control element with room temperature controller function for controlling commercially available actuating drives in connection with 6254/0.6, 6254/0.12. With display of set-value temperature. For contacting cover plate 6235-XX or 6236-xx The bus can be connected via enclosed terminal block.
Catalog Description:MD-F-1.0.1-840 Movement detector, antique brass, free@home control elements
Long Description:With select lens for detection with animal access. For automatic switching of ABB-free@home® actuators dependent on movement and brightness. Switch-off delay of the actuator can be programmed via the web interface of the System Access Point. The bus can be connected via enclosed terminal block.
Catalog Description:MSA-F-1.1.1-840 Movement detector/switch actuator, 1gang, antique brass, free@home control elements
Long Description:With select lens for detection with animal access. For automatic switching of ABB-free@home® actuators dependent on movement and brightness. Switch-off delay of the actuator can be programmed via the web interface of the System Access Point. For switching 127 V~/230 V~ consumers. With integrated switch actuator. Switching function is available also without prior programming (pre-configured). Configuration can be changed later via the web interface (groups, scenes, etc.). The bus can be connected via enclosed terminal block. When installing in the flush-mounted box, a spatial division between the bus cable and 127 V/230 V installation cable is to be adhered to! If this minimum distance is not possible, use electronic boxes or insulating tubes.
Long Description:For flush-mounted und hollow-wall installation of the ABB-free@homeTouch 4.3" 6226-6XX. Windproof. Installation dimensions (H x W x D): 82 mm x 123 mm x 50 mm Installation depth: 50 mm