Long Description:Ready-to-install 2-gang socket outlet that contains an end package, covers, a junction box with strain-reliefs and a 3 connectors. Approved for 3-phase linking._x000D_
Long Description:The general box contains an installation box and a cover plate. All 1-gang devices in the Jussi series (switches, dimmers, 1-gang sockets and telecommunication products) can be installed in the general box. An end package AUD30 or AUD31 is required for each group of general boxes. The depth of the box is 45 mm.
Long Description:The general box contains an installation box and a cover plate. All 1-gang devices in the Impressivo series (switches, dimmers, 1-gang sockets and telecommunication products) can be installed in the general box. An end package AUD30 or AUD31 is required for each group of general boxes. The depth of the box is 45 mm.
Long Description:The end package contains an end piece, covers and a junction box. Five individual connectors can be used in the junction box (max. 5x2.5).
Long Description:Corner-shaped RJ-45 connector box with nameplate. Includes a box frame without a bottom and a cover plate. With adapters AUD51.x it is possible to fix 1-3pcs RJ-45 connectors into the box.
Long Description:The AUS15.12 is a front-mounted mounting box for board walls. This box comprises a flexible fixing handle for 10 to 17 mm boards with large supporting surfaces. The installation hole diameter is 70 mm (box drill AT1). There are four inlets with strain reliefs on the bottom of the box for installing 5 x 2.5 mm MMJ cables. In addition, there are four knock-outs for inlets AN9.20 or ANK14.20 on the side of the box. The boxes can be interconnected (c/c 71 mm) using the AS28 interconnector, through which conductors can also be conveyed from one box to another. Made of halogen free material (IEC/61249-2-21) and fulfills the requirements of the glow wire test according to the standard IEC/EN60670: 2005 (850 °C).
Long Description:The AUS15.2 mounting box is used in buildings that have board walls. The holes are made with a hole saw (AT1, or equivalent). After the required conduit or cable inlets have been knocked out, the box is inserted in the hole. Turning the screws clockwise tightens the fastener against the board and secures the box in place. Conduits and cables are attached by using inlets that are pushed through from inside the box. Made of halogen free material (IEC/61249-2-21) and fulfills the requirements of the glow wire test according to the standard IEC/EN60670: 2005 (850 °C).
Long Description:The AUS15.12 is a front-mounted mounting box for board walls. This box comprises a flexible fixing handle for 22 to 29 mm boards with large supporting surfaces. The installation hole diameter is 70 mm (box drill AT1). There are four inlets with strain reliefs on the bottom of the box for installing 5 x 2.5 mm MMJ cables. The boxes can be interconnected (c/c 71 mm) using the AS28 interconnector, through which conductors can also be conveyed from one box to another. Made of halogen free material (IEC/61249-2-21) and fulfills the requirements of the glow wire test according to the standard IEC/EN60670: 2005 (850 °C).