Описание в каталоге: D4/6.LNTP6 Screw Clamp Terminal Blocks - Installation - Grey
Длинное описание: - Closed terminal block: no end section needed, - According to DIN 43880 standards (dimension above the rail 35 x 7.5 ≤ 44 mm), - Compatible with busbar.
Описание в каталоге: D4/6.LNTP7 Screw Clamp Terminal Blocks - Installation - Grey, Green-Yellow
Длинное описание: - Closed terminal block: no end section needed, - According to DIN 43880 standards (dimension above the rail 35 x 7.5 ≤ 44 mm), - Compatible with busbar.
Описание в каталоге: D4/6.LNTP8 Screw Clamp Terminal Blocks - Installation - Blue, Grey, Green-Yellow
Длинное описание: - Closed terminal block: no end section needed, - According to DIN 43880 standards (dimension above the rail 35 x 7.5 ≤ 44 mm), - Compatible with busbar.
Описание в каталоге: D4/6.N.ADO IDC Terminal Blocks - Feed-through ADO - screw clamp - Blue
Длинное описание: - With the ABB ADO System®, experience the fastest and most reliable connection on the market, - This solution brings all the benefits of the ADO System® and allows installators to connect on standard screw clamp, - Up to 2 wires per connection in the ADO System® connection.
Описание в каталоге: D4/6.NT.L Spring Terminal Blocks - Neutral disconnect - Blue
Длинное описание: - Specially developped for TN-C-S Network, - Easy disconnection of neutral for isolation, - Easy to access thanks to the front wiring entry, - Clamping contact pressure non dependent on the operator and automatic creeping compensation.
Описание в каталоге: D4/6.P.ADO IDC Terminal Blocks - Ground ADO - screw clamp - Green-Yellow
Длинное описание: - Protect your installation in the event of a short-circuit thanks to our screwless rail contact non operator dependent, - Secure mounting or removal from the rail, - This solution brings all the benefits of the ADO System® and allows installators to connect on standard screw clamp, - Up to 2 wires per connection in the ADO System® connection.
Описание в каталоге: D4/6.SN.ADO IDC Terminal Blocks - Disconnect with blade - with test socket - ADO - screw clamp - Grey
Длинное описание: - Ease your disconnect operations with the disconnect knife blade operated by hand, - With the ABB ADO System®, experience the fastest and most reliable connection on the market, - This solution brings all the benefits of the ADO System® and allows installators to connect on standard screw clamp, - Up to 2 wires per connection in the ADO System® connection.
Описание в каталоге: D4/6.SN.ADO IDC Terminal Blocks - Disconnect with blade - with test socket - ADO - screw clamp - Orange
Длинное описание: - Ease your disconnect operations with the disconnect knife blade operated by hand, - With the ABB ADO System®, experience the fastest and most reliable connection on the market, - This solution brings all the benefits of the ADO System® and allows installators to connect on standard screw clamp, - Up to 2 wires per connection in the ADO System® connection.
Описание в каталоге: D4/6.SNT2.ADO IDC Terminal Blocks - Disconnect with blade - with test socket - ADO - screw clamp - Grey
Длинное описание: - Ease your disconnect operations with the disconnect knife blade operated by hand, - With the ABB ADO System®, experience the fastest and most reliable connection on the market, - This solution brings all the benefits of the ADO System® and allows installators to connect on standard screw clamp, - Up to 2 wires per connection in the ADO System® connection.
Описание в каталоге: D4/6.T3 Screw Clamp Terminal Blocks - Triple deck - Grey
Длинное описание: - Save space with triple deck terminal blocks: 3 independent circuits connected in just 6 mm 0.236 in spacing, - Closed terminal block: no end section needed, optimized rigidity.
Идеальный вариант для применения в целях автоматизации процессов
Клеммные блоки для датчиков/активаторов позволяют сократить расходы на установку в случае применения цифровых или аналоговых сигналов в целях автоматизации процессов
Преимущества
Экономия места за счет использования компактных многоуровневых клеммных блоков для 3- и 4-проводных датчиков
Быстрая прокладка проводников благодаря распределению потенциала по всем цепям (положительным, отрицательным, цепям заземления или цепям общего назначения)
Простота идентификации цепей: все проводники одной цепи подключены только к одному клеммному блоку
Простота идентификации неполадокм благодаря светодиодным индикаторам состояния
Возможности
Сечение подключаемых проводников от 0,2 до 2,5 мм²
Виды клемм: винтовые клеммы, пружинные клеммы,ADO System®
Типы клемм: 2-, 3- и 4-проводные датчики, датчики NPN/PNP, термоэлектрические элементы
Удобные вставные перемычки с цветным кодированием для быстрого распределения потенциала
Универсальный термоэлектрический клеммный блок, совместимый со всеми типами термоэлектрических датчиков
Запрос коммерческого предложения
×
Сообщение отправлено
×
В ближайшее время сообщение будет обработано.
Письмо с номером обращения отправлено на Ваш почтовый ящик.
Спасибо за то, что выбрали Первый ZIP!
Что-то пошло не так...
×
К сожалению, наша система расценила Ваше сообщение как спам.
Если это произошло по ошибке, пожалуйста, обратитесь к нам по электронной почте.
Приносим извинения за возможные неудобства.
↑
Вы отправляете нам запрос
Если у нас есть прайс-лист, мы отправляем Вам ответ в течение дня.
А если у нас нет прайс-листа по запрошенным товарам?
Если у нас нет прайс-листа, мы отправляем запрос производителю.
Ответ от производителя может занять до 5 дней и более.
Запрос производителю мы отправляем только для конечных потребителей.
Торгующим организациям коммерческие предложения предоставляются только по прайсовым позициям: