Описание в каталоге: ZS10-GN Screw Clamp Terminal Block - Feed-through - Green
Длинное описание: - Save space by connecting conductors up to 10 mm² (without insulated ferrule, CB certified) 6 AWG in just 8 mm 0.315 in spacing, - Perfectly adapted to solar applications: voltage is rated 1000 V AC / DC IEC.
Описание в каталоге: ZS10-OR Screw Clamp Terminal Block - Feed-through - Orange
Длинное описание: - Save space by connecting conductors up to 10 mm² (without insulated ferrule, CB certified) 6 AWG in just 8 mm 0.315 in spacing, - Perfectly adapted to solar applications: voltage is rated 1000 V AC / DC IEC.
Описание в каталоге: ZS10-PE Screw Clamp Terminal Block - Ground - Green/Yellow
Длинное описание: Improve the safety of your installation in the event of a short-circuit thanks to our screwless rail contact: - Rail contact non operator dependent, - Performances above the requirements of IEC 60947-7-2 terminal block standard, - Secured snap on or remove from the rail.
Описание в каталоге: ZS10-PE-R1 Screw Clamp Terminal Block - Ground - Green/Yellow
Длинное описание: - With the same profile as the ZS10-ST..., the ground ZS10-PE-R1 allows you to fully implement the electrical drawing of your CT or PT circuits, - Fully compatible with the ZS10-ST... accessories, - Short-circuit performances above the requirements of IEC 60947-7-2 terminal block standard, - Secured snap on or remove from the rail.
Описание в каталоге: ZS10-PR Screw Clamp Terminal Block - Feed-through - Purple
Длинное описание: - Save space by connecting conductors up to 10 mm² (without insulated ferrule, CB certified) 6 AWG in just 8 mm 0.315 in spacing, - Perfectly adapted to solar applications: voltage is rated 1000 V AC / DC IEC.
Описание в каталоге: ZS10-R1 Screw terminal block- Feed-through- Grey
Длинное описание: - With the same profile as the ZS10-ST..., the feed-through ZS10-R1 allows you to fully implement the electrical drawing of your CT or PT circuits, - Fully compatible with the ZS10-ST... accessories.
Описание в каталоге: ZS10-RD Screw Clamp Terminal Block - Feed-through - Red
Длинное описание: - Save space by connecting conductors up to 10 mm² (without insulated ferrule, CB certified) 6 AWG in just 8 mm 0.315 in spacing, - Perfectly adapted to solar applications: voltage is rated 1000 V AC / DC IEC.
Описание в каталоге: ZS10-S Screw Clamp Terminal Block - Disconnect with blade - Grey
Длинное описание: - Ease your disconnect operations with the disconnect blade operated by hand or with a screwdriver, - Same profile as ZS10 feed-through terminal block for aligned marking and identical end section use.
Описание в каталоге: ZS10-S Screw Clamp Terminal Block - Disconnect with blade - Blue
Длинное описание: - Ease your disconnect operations with the disconnect blade operated by hand or with a screwdriver, - Same profile as ZS10 feed-through terminal block for aligned marking and identical end section use.
Описание в каталоге: ZS10-S-R2 Screw Clamp Terminal Block - Disconnect with lever- Grey
Длинное описание: Simplify the disconnect operations for the disconnect terminal blocks installed next to fuse terminal blocks ZS10-SF: - With the same profile as ZS10-SF, the ZS10-S-R2 disconnect lever is easily operated by hand and the wiring of the alternated disconnect and fuse circuits is easier.
Описание в каталоге: ZS10-SF Screw Clamp Terminal Block - for Fuses 6.3x32 mm - Grey
Длинное описание: - Protect your circuits with 6.3x32 (¼ x 1¼ in) fuse terminal blocks compliant with IEC 60947-7-3 standard (fuse not supplied with the terminal blocks), - Simplify the distribution thanks to the two jumper channels.
Описание в каталоге: ZS10-SF-R1 Screw Clamp Terminal Block - for Fuses 6.3x32 mm - with blown fuse indicator by red LED 24-110V- Grey
Длинное описание: - Protect your circuits with 6.3x32 (¼ x 1¼ in) fuse terminal blocks compliant with IEC 60947-7-3 standard (fuse not supplied with the terminal blocks), - Quickly identify the defective circuit thanks to the blown fuse indicator (with leakage current < 0.5 mA).
Описание в каталоге: ZS10-SF-R3 Screw Clamp Terminal Block - for Fuses 6.3x32 mm - with blown fuse indicator by red LED 115-250V- Grey
Длинное описание: - Protect your circuits with 6.3x32 (¼ x 1¼ in) fuse terminal blocks compliant with IEC 60947-7-3 standard (fuse not supplied with the terminal blocks), - Quickly identify the defective circuit thanks to the blown fuse indicator (with leakage current < 0.5 mA).
Описание в каталоге: ZS10-SP Screw Clamp Terminal Block - Disconnect with blade - Grey
Длинное описание: - Save time with our screwless component holder plug, - Same profile as ZS10 feed-through terminal block for aligned marking and identical end section use.
Описание в каталоге: ZS10-ST Screw terminal block- Test disconnect with sliding link- Grey
Длинное описание: - Secure your disconnect operations in control circuits with the robust sliding link operated with a screwdriver, - Customize ZS10-ST with colored test sockets in order to identify conveniently each phase of the Current Transformer or Potential Transformers secondary circuits, - Fully compatible with the ZS10-ST-T4 accessories.
Описание в каталоге: ZS10-ST-1 - Screw terminal block- Test disconnect- Grey
Длинное описание: Test terminal blocks especially designed for Potential Transformers circuits: - low profile voltage measurement thanks to the two compact built-in test sockets compatible with DIA 4 mm 0.157 in test plugs, - Installed with our aligned feed-through and ground terminal blocks, you benefit of a complete and compact solution for your PT circuits.
Описание в каталоге: ZS10-ST-1 Screw terminal block - Test disconnect with sliding link and with 2 test sockets- Grey
Длинное описание: Test terminal blocks especially designed for Current Transformers circuits: - easy and safe current measurement thanks to the two insulated built-in test sockets compatible with IP20 DIA 4 mm 0.157 in test plugs (per IEC60101-031), - convenient short-circuit operations with the SC-JB insulated sliding bridges.
Описание в каталоге: ZS10-WH Screw Clamp Terminal Block - Feed-through - White
Длинное описание: - Save space by connecting conductors up to 10 mm² (without insulated ferrule, CB certified) 6 AWG in just 8 mm 0.315 in spacing, - Perfectly adapted to solar applications: voltage is rated 1000 V AC / DC IEC.
Описание в каталоге: ZS10-YL Screw Clamp Terminal Block - Feed-through - Yellow
Длинное описание: - Save space by connecting conductors up to 10 mm² (without insulated ferrule, CB certified) 6 AWG in just 8 mm 0.315 in spacing, - Perfectly adapted to solar applications: voltage is rated 1000 V AC / DC IEC.
Описание в каталоге: ZS16 Screw Clamp Terminal Block - Feed-through - Grey
Длинное описание: - Save space by connecting conductors up to 16 mm² (without insulated ferrule, CB certified) 4 AWG in just 10 mm 0.394 in spacing, - Perfectly adapted to solar applications: voltage is rated 1000 V AC / DC IEC.
Один из наиболее широких ассортиментов клеммных соединений на рынке
Компания АББ предлагает один из наиболее широких ассортиментов клеммных соединений на рынке: винтовые клеммы, кружинные клеммы, втычные клеммы PI-Spring, клеммы с прорезанием изоляции, клеммы c разъемами, клеммы Faston и т. д. Данные виды соединений используются более чем в 8000 различных изделий и решений.
Преимущества
Высококачественные изделия - преимущества лучших соединений.
Упрощение и ускорение логистики: стабильное время доставки.
Инновационные разработки для будущего.
Высокая надежность соединений и возможность решения любых проблем соединения.
Возможности
Сечение подключаемых проводников от 0,22 до 300 мм².
Широкий ассортимент охватывает все области применения и функциональные возможности.
Доступность по всему миру.
Эксклюзивные решения и технологии, например, клеммные блоки ADO System, тестовые блоки Essailec, система предварительного соединения контроллеров с другими устройствами Interfast.
Свяжитесь с нами
Если вы не нашли нужной информации на сайте или у вас остались вопросы по товарам, оставьте заявку на бесплатную консультацию, и мы вам перезвоним
Запрос коммерческого предложения
×
Сообщение отправлено
×
В ближайшее время сообщение будет обработано.
Письмо с номером обращения отправлено на Ваш почтовый ящик.
Спасибо за то, что выбрали Первый ZIP!
Что-то пошло не так...
×
К сожалению, наша система расценила Ваше сообщение как спам.
Если это произошло по ошибке, пожалуйста, обратитесь к нам по электронной почте.
Приносим извинения за возможные неудобства.
↑
Вы отправляете нам запрос
Если у нас есть прайс-лист, мы отправляем Вам ответ в течение дня.
А если у нас нет прайс-листа по запрошенным товарам?
Если у нас нет прайс-листа, мы отправляем запрос производителю.
Ответ от производителя может занять до 5 дней и более.
Запрос производителю мы отправляем только для конечных потребителей.
Торгующим организациям коммерческие предложения предоставляются только по прайсовым позициям: