Описание в каталоге: M4/6.D2.N Screw Clamp Terminal Blocks - Double deck - Blue
Длинное описание: - Save space with double deck terminal blocks: 2 independent circuits connected in just 6 mm 0.236 in spacing, - Flexibility: snap onto symmetrical and asymmetrical rails.
Описание в каталоге: M4/6.D2.S1R Screw Clamp Terminal Blocks - Disconnect with pull lever - change over type - Grey, Black
Длинное описание: - Direct a signal either to the upper deck (contact control pull lever in high position), or to the lower deck (pull lever in low position) with just one operation, - Closed terminal block: no end section needed.
Описание в каталоге: M4/6.D2.S1R.T Screw Clamp Terminal Blocks - Disconnect with pull lever - change over type with 3 test sockets - Grey, Black
Длинное описание: - Direct a signal either to the upper deck (contact control pull lever in high position), or to the lower deck (pull lever in low position) with just one operation, - Ease your test operations with the built-in test sockets, - Closed terminal block: no end section needed.
Описание в каталоге: M4/6.D2.SBT Screw Clamp Terminal Blocks - Disconnect with plug - with test socket - Grey
Длинное описание: - Save space with double deck terminal blocks: 1 disconnect circuit on top + 1 independent feed-through circuit on bottom in just 6 mm 0.236 in spacing, - Ease your disconnect operations with the disconnect component holder plug.
Описание в каталоге: M4/6.D2.SNBT Screw Clamp Terminal Blocks - Disconnect with blade - with test socket - Grey
Длинное описание: - Save space with double deck terminal blocks: 1 disconnect circuit on top + 1 independent feed-through circuit on bottom in just 6 mm 0.236 in spacing, - Ease your disconnect operations with the disconnect blade operated by hand or with a screwdriver, - Same profile as M4/6.D2 feed-through terminal block for aligned marking and identical end section use.
Описание в каталоге: M4/6.D2.SNBT.NC Screw Clamp Terminal Blocks - Corrosive Environments - Disconnect Grey
Длинное описание: - Save space with double deck terminal blocks: 1 disconnect circuit on top + 1 independent feed-through circuit on bottom in just 6 mm 0.236 in spacing, - Ease your disconnect operations with the disconnect blade operated by hand or with a screwdriver, - Same profile as M4/6.D2 feed-through terminal block for aligned marking and identical end section use.
Максимально компактный клеммный блок для эксплуатации в условиях ограниченного пространства
Мини-клеммы характеризуются компактными габаритами. Они предназначены для использования в условиях, когда пространство ограничено (соединительные коробки, машины, двигатели и т. д.).
Преимущества
Сокращение пространства между кабельными каналами до 40 % по сравнению с традиционными клеммными блоками
Уменьшение высоты до 40 % по сравнению с традиционными клеммными блоками
Различные варианты установки: TH35, TH15, опорный монтаж или монтаж с защелками