Оборудование для управления и защиты электродвигателей ABB

    Показано товаров: 20 из 10478
    Артикул: 949430
    Тип расширенного изделия: UA50-30-11 100V 50Hz / 100-110V 60Hz
    Идентификационный номер изделия: 1SBL351022R7411
    Европейский товарный код (EAN): 3471522085740
    Описание в каталоге: UA50-30-11 100V 50Hz / 100-110V 60Hz Contactor
    Длинное описание: UA50 3-pole contactors for capacitor switching, can be used for the switching of capacitor banks whose inrush current peaks are less than or equal to 100 times nominal rms current. The table below gives the permissible powers according to operational voltage and temperature close to the contactor. It also specifies the maximum peak current Î values accepted by the contactor. The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. In these conditions, electrical durability of contactors is equal to 100 000 operating cycles. The UA.. series 3-pole contactors are of the block type design. - Main poles and auxiliary contacts: 3 main poles, 2 built-in auxiliary contacts - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.
    В корзину

    Товар в корзине.

    Перейти в корзину
    Артикул: 949431
    Тип расширенного изделия: UA50-30-11 105V 50Hz / 110-127V 60Hz
    Идентификационный номер изделия: 1SBL351022R2611
    Европейский товарный код (EAN): 3471522085269
    Описание в каталоге: UA50-30-11 105V 50Hz / 110-127V 60Hz Contactor
    Длинное описание: UA50 3-pole contactors for capacitor switching, can be used for the switching of capacitor banks whose inrush current peaks are less than or equal to 100 times nominal rms current. The table below gives the permissible powers according to operational voltage and temperature close to the contactor. It also specifies the maximum peak current Î values accepted by the contactor. The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. In these conditions, electrical durability of contactors is equal to 100 000 operating cycles. The UA.. series 3-pole contactors are of the block type design. - Main poles and auxiliary contacts: 3 main poles, 2 built-in auxiliary contacts - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.
    В корзину

    Товар в корзине.

    Перейти в корзину
    Артикул: 949432
    Тип расширенного изделия: UA50-30-11 110-115V 50Hz / 115-127V 60Hz
    Идентификационный номер изделия: 1SBL351022R8911
    Европейский товарный код (EAN): 3471522085894
    Описание в каталоге: UA50-30-11 110-115V 50Hz / 115-127V 60Hz Contactor
    Длинное описание: UA50 3-pole contactors for capacitor switching, can be used for the switching of capacitor banks whose inrush current peaks are less than or equal to 100 times nominal rms current. The table below gives the permissible powers according to operational voltage and temperature close to the contactor. It also specifies the maximum peak current Î values accepted by the contactor. The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. In these conditions, electrical durability of contactors is equal to 100 000 operating cycles. The UA.. series 3-pole contactors are of the block type design. - Main poles and auxiliary contacts: 3 main poles, 2 built-in auxiliary contacts - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.
    В корзину

    Товар в корзине.

    Перейти в корзину
    Артикул: 949433
    Тип расширенного изделия: UA50-30-11 110V 50Hz / 110-120V 60Hz
    Идентификационный номер изделия: 1SBL351022R8411
    Европейский товарный код (EAN): 3471522085849
    Описание в каталоге: UA50-30-11 110V 50Hz / 110-120V 60Hz Contactor
    Длинное описание: UA50 3-pole contactors for capacitor switching, can be used for the switching of capacitor banks whose inrush current peaks are less than or equal to 100 times nominal rms current. The table below gives the permissible powers according to operational voltage and temperature close to the contactor. It also specifies the maximum peak current Î values accepted by the contactor. The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. In these conditions, electrical durability of contactors is equal to 100 000 operating cycles. The UA.. series 3-pole contactors are of the block type design. - Main poles and auxiliary contacts: 3 main poles, 2 built-in auxiliary contacts - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.
    В корзину

    Товар в корзине.

    Перейти в корзину
    Артикул: 949434
    Тип расширенного изделия: UA50-30-11 120V 50Hz / 140V 60Hz
    Идентификационный номер изделия: 1SBL351022R2911
    Европейский товарный код (EAN): 3471522085290
    Описание в каталоге: UA50-30-11 120V 50Hz / 140V 60Hz Contactor
    Длинное описание: UA50 3-pole contactors for capacitor switching, can be used for the switching of capacitor banks whose inrush current peaks are less than or equal to 100 times nominal rms current. The table below gives the permissible powers according to operational voltage and temperature close to the contactor. It also specifies the maximum peak current Î values accepted by the contactor. The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. In these conditions, electrical durability of contactors is equal to 100 000 operating cycles. The UA.. series 3-pole contactors are of the block type design. - Main poles and auxiliary contacts: 3 main poles, 2 built-in auxiliary contacts - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.
    В корзину

    Товар в корзине.

    Перейти в корзину
    Артикул: 949435
    Тип расширенного изделия: UA50-30-11 125-127V 50Hz / 150V 60Hz
    Идентификационный номер изделия: 1SBL351022R3011
    Европейский товарный код (EAN): 3471522085306
    Описание в каталоге: UA50-30-11 125-127V 50Hz / 150V 60Hz Contactor
    Длинное описание: UA50 3-pole contactors for capacitor switching, can be used for the switching of capacitor banks whose inrush current peaks are less than or equal to 100 times nominal rms current. The table below gives the permissible powers according to operational voltage and temperature close to the contactor. It also specifies the maximum peak current Î values accepted by the contactor. The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. In these conditions, electrical durability of contactors is equal to 100 000 operating cycles. The UA.. series 3-pole contactors are of the block type design. - Main poles and auxiliary contacts: 3 main poles, 2 built-in auxiliary contacts - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.
    В корзину

    Товар в корзине.

    Перейти в корзину
    Артикул: 949436
    Тип расширенного изделия: UA50-30-11 170V 50Hz / 200V 60Hz
    Идентификационный номер изделия: 1SBL351022R3311
    Европейский товарный код (EAN): 3471522085337
    Описание в каталоге: UA50-30-11 170V 50Hz / 200V 60Hz Contactor
    Длинное описание: UA50 3-pole contactors for capacitor switching, can be used for the switching of capacitor banks whose inrush current peaks are less than or equal to 100 times nominal rms current. The table below gives the permissible powers according to operational voltage and temperature close to the contactor. It also specifies the maximum peak current Î values accepted by the contactor. The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. In these conditions, electrical durability of contactors is equal to 100 000 operating cycles. The UA.. series 3-pole contactors are of the block type design. - Main poles and auxiliary contacts: 3 main poles, 2 built-in auxiliary contacts - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.
    В корзину

    Товар в корзине.

    Перейти в корзину
    Артикул: 949437
    Тип расширенного изделия: UA50-30-11 175V 50Hz / 208V 60Hz
    Идентификационный номер изделия: 1SBL351022R3411
    Европейский товарный код (EAN): 3471522085344
    Описание в каталоге: UA50-30-11 175V 50Hz / 208V 60Hz Contactor
    Длинное описание: UA50 3-pole contactors for capacitor switching, can be used for the switching of capacitor banks whose inrush current peaks are less than or equal to 100 times nominal rms current. The table below gives the permissible powers according to operational voltage and temperature close to the contactor. It also specifies the maximum peak current Î values accepted by the contactor. The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. In these conditions, electrical durability of contactors is equal to 100 000 operating cycles. The UA.. series 3-pole contactors are of the block type design. - Main poles and auxiliary contacts: 3 main poles, 2 built-in auxiliary contacts - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.
    В корзину

    Товар в корзине.

    Перейти в корзину
    Артикул: 949438
    Тип расширенного изделия: UA50-30-11 190V 50Hz / 220V 60Hz
    Идентификационный номер изделия: 1SBL351022R3611
    Европейский товарный код (EAN): 3471522085368
    Описание в каталоге: UA50-30-11 190V 50Hz / 220V 60Hz Contactor
    Длинное описание: UA50 3-pole contactors for capacitor switching, can be used for the switching of capacitor banks whose inrush current peaks are less than or equal to 100 times nominal rms current. The table below gives the permissible powers according to operational voltage and temperature close to the contactor. It also specifies the maximum peak current Î values accepted by the contactor. The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. In these conditions, electrical durability of contactors is equal to 100 000 operating cycles. The UA.. series 3-pole contactors are of the block type design. - Main poles and auxiliary contacts: 3 main poles, 2 built-in auxiliary contacts - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.
    В корзину

    Товар в корзине.

    Перейти в корзину
    Артикул: 949439
    Тип расширенного изделия: UA50-30-11 200V 50Hz / 200-220V 60Hz
    Идентификационный номер изделия: 1SBL351022R7511
    Европейский товарный код (EAN): 3471522085757
    Описание в каталоге: UA50-30-11 200V 50Hz / 200-220V 60Hz Contactor
    Длинное описание: UA50 3-pole contactors for capacitor switching, can be used for the switching of capacitor banks whose inrush current peaks are less than or equal to 100 times nominal rms current. The table below gives the permissible powers according to operational voltage and temperature close to the contactor. It also specifies the maximum peak current Î values accepted by the contactor. The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. In these conditions, electrical durability of contactors is equal to 100 000 operating cycles. The UA.. series 3-pole contactors are of the block type design. - Main poles and auxiliary contacts: 3 main poles, 2 built-in auxiliary contacts - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.
    В корзину

    Товар в корзине.

    Перейти в корзину
    Артикул: 949440
    Тип расширенного изделия: UA50-30-11 200V 50Hz / 230V 60Hz
    Идентификационный номер изделия: 1SBL351022R3711
    Европейский товарный код (EAN): 3471522085375
    Описание в каталоге: UA50-30-11 200V 50Hz / 230V 60Hz Contactor
    Длинное описание: UA50 3-pole contactors for capacitor switching, can be used for the switching of capacitor banks whose inrush current peaks are less than or equal to 100 times nominal rms current. The table below gives the permissible powers according to operational voltage and temperature close to the contactor. It also specifies the maximum peak current Î values accepted by the contactor. The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. In these conditions, electrical durability of contactors is equal to 100 000 operating cycles. The UA.. series 3-pole contactors are of the block type design. - Main poles and auxiliary contacts: 3 main poles, 2 built-in auxiliary contacts - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.
    В корзину

    Товар в корзине.

    Перейти в корзину
    Артикул: 949441
    Тип расширенного изделия: UA50-30-11 20V 50Hz / 24V 60Hz
    Идентификационный номер изделия: 1SBL351022R1511
    Европейский товарный код (EAN): 3471522085153
    Описание в каталоге: UA50-30-11 20V 50Hz / 24V 60Hz Contactor
    Длинное описание: UA50 3-pole contactors for capacitor switching, can be used for the switching of capacitor banks whose inrush current peaks are less than or equal to 100 times nominal rms current. The table below gives the permissible powers according to operational voltage and temperature close to the contactor. It also specifies the maximum peak current Î values accepted by the contactor. The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. In these conditions, electrical durability of contactors is equal to 100 000 operating cycles. The UA.. series 3-pole contactors are of the block type design. - Main poles and auxiliary contacts: 3 main poles, 2 built-in auxiliary contacts - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.
    В корзину

    Товар в корзине.

    Перейти в корзину
    Артикул: 949442
    Тип расширенного изделия: UA50-30-11 210V 50Hz / 240V 60Hz
    Идентификационный номер изделия: 1SBL351022R4011
    Европейский товарный код (EAN): 3471522085405
    Описание в каталоге: UA50-30-11 210V 50Hz / 240V 60Hz Contactor
    Длинное описание: UA50 3-pole contactors for capacitor switching, can be used for the switching of capacitor banks whose inrush current peaks are less than or equal to 100 times nominal rms current. The table below gives the permissible powers according to operational voltage and temperature close to the contactor. It also specifies the maximum peak current Î values accepted by the contactor. The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. In these conditions, electrical durability of contactors is equal to 100 000 operating cycles. The UA.. series 3-pole contactors are of the block type design. - Main poles and auxiliary contacts: 3 main poles, 2 built-in auxiliary contacts - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.
    В корзину

    Товар в корзине.

    Перейти в корзину
    Артикул: 949443
    Тип расширенного изделия: UA50-30-11 220-230V 50Hz / 230-240V 60Hz
    Идентификационный номер изделия: 1SBL351022R8011
    Европейский товарный код (EAN): 3471522085801
    Описание в каталоге: UA50-30-11 220-230V 50Hz / 230-240V 60Hz Contactor
    Длинное описание: UA50 3-pole contactors for capacitor switching, can be used for the switching of capacitor banks whose inrush current peaks are less than or equal to 100 times nominal rms current. The table below gives the permissible powers according to operational voltage and temperature close to the contactor. It also specifies the maximum peak current Î values accepted by the contactor. The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. In these conditions, electrical durability of contactors is equal to 100 000 operating cycles. The UA.. series 3-pole contactors are of the block type design. - Main poles and auxiliary contacts: 3 main poles, 2 built-in auxiliary contacts - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.
    В корзину

    Товар в корзине.

    Перейти в корзину
    Артикул: 949444
    Тип расширенного изделия: UA50-30-11 230-240V 50Hz / 240-260V 60Hz
    Идентификационный номер изделия: 1SBL351022R8811
    Европейский товарный код (EAN): 3471522085887
    Описание в каталоге: UA50-30-11 230-240V 50Hz / 240-260V 60Hz Contactor
    Длинное описание: UA50 3-pole contactors for capacitor switching, can be used for the switching of capacitor banks whose inrush current peaks are less than or equal to 100 times nominal rms current. The table below gives the permissible powers according to operational voltage and temperature close to the contactor. It also specifies the maximum peak current Î values accepted by the contactor. The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. In these conditions, electrical durability of contactors is equal to 100 000 operating cycles. The UA.. series 3-pole contactors are of the block type design. - Main poles and auxiliary contacts: 3 main poles, 2 built-in auxiliary contacts - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.
    В корзину

    Товар в корзине.

    Перейти в корзину
    Артикул: 949445
    Тип расширенного изделия: UA50-30-11 230-240V 50Hz / 277V 60Hz
    Идентификационный номер изделия: 1SBL351022R4211
    Европейский товарный код (EAN): 3471522085429
    Описание в каталоге: UA50-30-11 230-240V 50Hz / 277V 60Hz Contactor
    Длинное описание: UA50 3-pole contactors for capacitor switching, can be used for the switching of capacitor banks whose inrush current peaks are less than or equal to 100 times nominal rms current. The table below gives the permissible powers according to operational voltage and temperature close to the contactor. It also specifies the maximum peak current Î values accepted by the contactor. The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. In these conditions, electrical durability of contactors is equal to 100 000 operating cycles. The UA.. series 3-pole contactors are of the block type design. - Main poles and auxiliary contacts: 3 main poles, 2 built-in auxiliary contacts - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.
    В корзину

    Товар в корзине.

    Перейти в корзину
    Артикул: 949446
    Тип расширенного изделия: UA50-30-11 24V 50Hz / 24V 60Hz
    Идентификационный номер изделия: 1SBL351022R8111
    Европейский товарный код (EAN): 3471522085818
    Описание в каталоге: UA50-30-11 24V 50Hz / 24V 60Hz Contactor
    Длинное описание: UA50 3-pole contactors for capacitor switching, can be used for the switching of capacitor banks whose inrush current peaks are less than or equal to 100 times nominal rms current. The table below gives the permissible powers according to operational voltage and temperature close to the contactor. It also specifies the maximum peak current Î values accepted by the contactor. The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. In these conditions, electrical durability of contactors is equal to 100 000 operating cycles. The UA.. series 3-pole contactors are of the block type design. - Main poles and auxiliary contacts: 3 main poles, 2 built-in auxiliary contacts - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.
    В корзину

    Товар в корзине.

    Перейти в корзину
    Артикул: 949447
    Тип расширенного изделия: UA50-30-11 250-255V 50Hz / 290-295V 60Hz
    Идентификационный номер изделия: 1SBL351022R4311
    Европейский товарный код (EAN): 3471522085436
    Описание в каталоге: UA50-30-11 250-255V 50Hz / 290-295V 60Hz Contactor
    Длинное описание: UA50 3-pole contactors for capacitor switching, can be used for the switching of capacitor banks whose inrush current peaks are less than or equal to 100 times nominal rms current. The table below gives the permissible powers according to operational voltage and temperature close to the contactor. It also specifies the maximum peak current Î values accepted by the contactor. The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. In these conditions, electrical durability of contactors is equal to 100 000 operating cycles. The UA.. series 3-pole contactors are of the block type design. - Main poles and auxiliary contacts: 3 main poles, 2 built-in auxiliary contacts - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.
    В корзину

    Товар в корзине.

    Перейти в корзину
    Артикул: 949448
    Тип расширенного изделия: UA50-30-11 26V 50Hz / 28V 60Hz
    Идентификационный номер изделия: 1SBL351022R1611
    Европейский товарный код (EAN): 3471522085160
    Описание в каталоге: UA50-30-11 26V 50Hz / 28V 60Hz Contactor
    Длинное описание: UA50 3-pole contactors for capacitor switching, can be used for the switching of capacitor banks whose inrush current peaks are less than or equal to 100 times nominal rms current. The table below gives the permissible powers according to operational voltage and temperature close to the contactor. It also specifies the maximum peak current Î values accepted by the contactor. The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. In these conditions, electrical durability of contactors is equal to 100 000 operating cycles. The UA.. series 3-pole contactors are of the block type design. - Main poles and auxiliary contacts: 3 main poles, 2 built-in auxiliary contacts - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.
    В корзину

    Товар в корзине.

    Перейти в корзину
    Артикул: 949449
    Тип расширенного изделия: UA50-30-11 28V 50Hz / 32V 60Hz
    Идентификационный номер изделия: 1SBL351022R1711
    Европейский товарный код (EAN): 3471522085177
    Описание в каталоге: UA50-30-11 28V 50Hz / 32V 60Hz Contactor
    Длинное описание: UA50 3-pole contactors for capacitor switching, can be used for the switching of capacitor banks whose inrush current peaks are less than or equal to 100 times nominal rms current. The table below gives the permissible powers according to operational voltage and temperature close to the contactor. It also specifies the maximum peak current Î values accepted by the contactor. The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. In these conditions, electrical durability of contactors is equal to 100 000 operating cycles. The UA.. series 3-pole contactors are of the block type design. - Main poles and auxiliary contacts: 3 main poles, 2 built-in auxiliary contacts - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.
    В корзину

    Товар в корзине.

    Перейти в корзину

    Компания АББ устанавливает новый стандарт для устройств управления и защиты электродвигателей и распределения электроэнергии

    Компания АББ предлагает самый широкий ассортимент оборудования для управления электродвигателем и его защиты. Наш широкий ассортимент решений, изделий и услуг для запуска двигателей позволяет системному интегратору, производителю комплексного оборудования, техническому консультанту и дистрибьютору, а также производителю щитового оборудования и конечному пользователю использовать продукцию с неизменно высоким уровнем качества и производительности.

    Свяжитесь с нами

    Если вы не нашли нужной информации на сайте или у вас остались вопросы по товарам, оставьте заявку на бесплатную консультацию, и мы вам перезвоним