Switch cabinet enclosures DOLD
Показано товаров: 20 из 82
Артикул: 1325516
• Width 22.5 mm / 45 / 67.5 / 90 mm
• Max. 16 / 32 / 48 / 64 spring cage clamps
• Large, variable front plate surface
• Max. current carrying capacity 16 A
• Machine soldered terminal block,
use of heat-resistant plastic means no
cover for the terminal block facing the
soldering bath is required
• Easy and quick connecting of conductors:
solid wire and flexible wire with
end ferrule can be inserted directly
(saving of time in comparsion to screw
terminals: 50 - 80 %)
• Easy removing of conductors (put in a
screwdriver according to DIN 5264-A 0.5 x 3)
• High spring force for a secure connection
• Printed circuit board density t = 1.5 mm
and 1 mm possible
• Max. 16 / 32 / 48 / 64 spring cage clamps
• Large, variable front plate surface
• Max. current carrying capacity 16 A
• Machine soldered terminal block,
use of heat-resistant plastic means no
cover for the terminal block facing the
soldering bath is required
• Easy and quick connecting of conductors:
solid wire and flexible wire with
end ferrule can be inserted directly
(saving of time in comparsion to screw
terminals: 50 - 80 %)
• Easy removing of conductors (put in a
screwdriver according to DIN 5264-A 0.5 x 3)
• High spring force for a secure connection
• Printed circuit board density t = 1.5 mm
and 1 mm possible
Артикул: 1325515
• Width 22.5 mm / 45 / 67.5 / 90 mm
• Max. 16 / 32 / 48 / 64 spring cage clamps
• Large, variable front plate surface
• Max. current carrying capacity 16 A
• Machine soldered terminal block,
use of heat-resistant plastic means no
cover for the terminal block facing the
soldering bath is required
• Easy and quick connecting of conductors:
solid wire and flexible wire with
end ferrule can be inserted directly
(saving of time in comparsion to screw
terminals: 50 - 80 %)
• Easy removing of conductors (put in a
screwdriver according to DIN 5264-A 0.5 x 3)
• High spring force for a secure connection
• Printed circuit board density t = 1.5 mm
and 1 mm possible
• Max. 16 / 32 / 48 / 64 spring cage clamps
• Large, variable front plate surface
• Max. current carrying capacity 16 A
• Machine soldered terminal block,
use of heat-resistant plastic means no
cover for the terminal block facing the
soldering bath is required
• Easy and quick connecting of conductors:
solid wire and flexible wire with
end ferrule can be inserted directly
(saving of time in comparsion to screw
terminals: 50 - 80 %)
• Easy removing of conductors (put in a
screwdriver according to DIN 5264-A 0.5 x 3)
• High spring force for a secure connection
• Printed circuit board density t = 1.5 mm
and 1 mm possible
Артикул: 1325514
• Width 22.5 mm / 45 / 67.5 / 90 mm
• Max. 16 / 32 / 48 / 64 spring cage clamps
• Large, variable front plate surface
• Max. current carrying capacity 16 A
• Machine soldered terminal block,
use of heat-resistant plastic means no
cover for the terminal block facing the
soldering bath is required
• Easy and quick connecting of conductors:
solid wire and flexible wire with
end ferrule can be inserted directly
(saving of time in comparsion to screw
terminals: 50 - 80 %)
• Easy removing of conductors (put in a
screwdriver according to DIN 5264-A 0.5 x 3)
• High spring force for a secure connection
• Printed circuit board density t = 1.5 mm
and 1 mm possible
• Max. 16 / 32 / 48 / 64 spring cage clamps
• Large, variable front plate surface
• Max. current carrying capacity 16 A
• Machine soldered terminal block,
use of heat-resistant plastic means no
cover for the terminal block facing the
soldering bath is required
• Easy and quick connecting of conductors:
solid wire and flexible wire with
end ferrule can be inserted directly
(saving of time in comparsion to screw
terminals: 50 - 80 %)
• Easy removing of conductors (put in a
screwdriver according to DIN 5264-A 0.5 x 3)
• High spring force for a secure connection
• Printed circuit board density t = 1.5 mm
and 1 mm possible
Артикул: 1325513
• Width 22.5 mm / 45 / 67.5 / 90 mm
• Max. 16 / 32 / 48 / 64 spring cage clamps
• Large, variable front plate surface
• Max. current carrying capacity 16 A
• Machine soldered terminal block,
use of heat-resistant plastic means no
cover for the terminal block facing the
soldering bath is required
• Easy and quick connecting of conductors:
solid wire and flexible wire with
end ferrule can be inserted directly
(saving of time in comparsion to screw
terminals: 50 - 80 %)
• Easy removing of conductors (put in a
screwdriver according to DIN 5264-A 0.5 x 3)
• High spring force for a secure connection
• Printed circuit board density t = 1.5 mm
and 1 mm possible
• Max. 16 / 32 / 48 / 64 spring cage clamps
• Large, variable front plate surface
• Max. current carrying capacity 16 A
• Machine soldered terminal block,
use of heat-resistant plastic means no
cover for the terminal block facing the
soldering bath is required
• Easy and quick connecting of conductors:
solid wire and flexible wire with
end ferrule can be inserted directly
(saving of time in comparsion to screw
terminals: 50 - 80 %)
• Easy removing of conductors (put in a
screwdriver according to DIN 5264-A 0.5 x 3)
• High spring force for a secure connection
• Printed circuit board density t = 1.5 mm
and 1 mm possible
Артикул: 1325512
• Width 22,5 / 45 / 67,5 / 90 mm
• Max. 16 / 32 / 48 / 64 box terminals
• Large, variable front plate surface
• Large cross section of connections possible
(e.g. 2 x 1.5 mm2 with stranded ferruled)
• Max. current carrying capacity 16 A
• Machine soldered terminal block,
use of heat-resistant plastic means no
cover for the terminal block facing the
soldering bath is required
• Large plus-minus screws enable high
tightening torques
• High-voltage test complying with IEC 60 439-1
• Printed circuit board density t = 1.5 mm and
1 mm possible
• Max. 16 / 32 / 48 / 64 box terminals
• Large, variable front plate surface
• Large cross section of connections possible
(e.g. 2 x 1.5 mm2 with stranded ferruled)
• Max. current carrying capacity 16 A
• Machine soldered terminal block,
use of heat-resistant plastic means no
cover for the terminal block facing the
soldering bath is required
• Large plus-minus screws enable high
tightening torques
• High-voltage test complying with IEC 60 439-1
• Printed circuit board density t = 1.5 mm and
1 mm possible
Артикул: 1325511
• Width 22,5 / 45 / 67,5 / 90 mm
• Max. 16 / 32 / 48 / 64 box terminals
• Large, variable front plate surface
• Large cross section of connections possible
(e.g. 2 x 1.5 mm2 with stranded ferruled)
• Max. current carrying capacity 16 A
• Machine soldered terminal block,
use of heat-resistant plastic means no
cover for the terminal block facing the
soldering bath is required
• Large plus-minus screws enable high
tightening torques
• High-voltage test complying with IEC 60 439-1
• Printed circuit board density t = 1.5 mm and
1 mm possible
• Max. 16 / 32 / 48 / 64 box terminals
• Large, variable front plate surface
• Large cross section of connections possible
(e.g. 2 x 1.5 mm2 with stranded ferruled)
• Max. current carrying capacity 16 A
• Machine soldered terminal block,
use of heat-resistant plastic means no
cover for the terminal block facing the
soldering bath is required
• Large plus-minus screws enable high
tightening torques
• High-voltage test complying with IEC 60 439-1
• Printed circuit board density t = 1.5 mm and
1 mm possible
Артикул: 1325510
• Width 22,5 / 45 / 67,5 / 90 mm
• Max. 16 / 32 / 48 / 64 box terminals
• Large, variable front plate surface
• Large cross section of connections possible
(e.g. 2 x 1.5 mm2 with stranded ferruled)
• Max. current carrying capacity 16 A
• Machine soldered terminal block,
use of heat-resistant plastic means no
cover for the terminal block facing the
soldering bath is required
• Large plus-minus screws enable high
tightening torques
• High-voltage test complying with IEC 60 439-1
• Printed circuit board density t = 1.5 mm and
1 mm possible
• Max. 16 / 32 / 48 / 64 box terminals
• Large, variable front plate surface
• Large cross section of connections possible
(e.g. 2 x 1.5 mm2 with stranded ferruled)
• Max. current carrying capacity 16 A
• Machine soldered terminal block,
use of heat-resistant plastic means no
cover for the terminal block facing the
soldering bath is required
• Large plus-minus screws enable high
tightening torques
• High-voltage test complying with IEC 60 439-1
• Printed circuit board density t = 1.5 mm and
1 mm possible
Артикул: 1325509
• Width 22,5 / 45 / 67,5 / 90 mm
• Max. 16 / 32 / 48 / 64 box terminals
• Large, variable front plate surface
• Large cross section of connections possible
(e.g. 2 x 1.5 mm2 with stranded ferruled)
• Max. current carrying capacity 16 A
• Machine soldered terminal block,
use of heat-resistant plastic means no
cover for the terminal block facing the
soldering bath is required
• Large plus-minus screws enable high
tightening torques
• High-voltage test complying with IEC 60 439-1
• Printed circuit board density t = 1.5 mm and
1 mm possible
• Max. 16 / 32 / 48 / 64 box terminals
• Large, variable front plate surface
• Large cross section of connections possible
(e.g. 2 x 1.5 mm2 with stranded ferruled)
• Max. current carrying capacity 16 A
• Machine soldered terminal block,
use of heat-resistant plastic means no
cover for the terminal block facing the
soldering bath is required
• Large plus-minus screws enable high
tightening torques
• High-voltage test complying with IEC 60 439-1
• Printed circuit board density t = 1.5 mm and
1 mm possible
Артикул: 1325508
• Width 22,5 / 45 / 67,5 / 90 mm
• Max. 16 / 32 / 48 / 64 box terminals
• Large, variable front plate surface
• Large cross section of connections possible
(e.g. 2 x 1.5 mm2 with stranded ferruled)
• Max. current carrying capacity 16 A
• Machine soldered terminal block,
use of heat-resistant plastic means no
cover for the terminal block facing the
soldering bath is required
• Large plus-minus screws enable high
tightening torques
• High-voltage test complying with IEC 60 439-1
• Printed circuit board density t = 1.5 mm and
1 mm possible
• Max. 16 / 32 / 48 / 64 box terminals
• Large, variable front plate surface
• Large cross section of connections possible
(e.g. 2 x 1.5 mm2 with stranded ferruled)
• Max. current carrying capacity 16 A
• Machine soldered terminal block,
use of heat-resistant plastic means no
cover for the terminal block facing the
soldering bath is required
• Large plus-minus screws enable high
tightening torques
• High-voltage test complying with IEC 60 439-1
• Printed circuit board density t = 1.5 mm and
1 mm possible
Артикул: 1325507
• Width 22,5 / 45 / 67,5 / 90 mm
• Max. 16 / 32 / 48 / 64 box terminals
• Large, variable front plate surface
• Large cross section of connections possible
(e.g. 2 x 1.5 mm2 with stranded ferruled)
• Max. current carrying capacity 16 A
• Machine soldered terminal block,
use of heat-resistant plastic means no
cover for the terminal block facing the
soldering bath is required
• Large plus-minus screws enable high
tightening torques
• High-voltage test complying with IEC 60 439-1
• Printed circuit board density t = 1.5 mm and
1 mm possible
• Max. 16 / 32 / 48 / 64 box terminals
• Large, variable front plate surface
• Large cross section of connections possible
(e.g. 2 x 1.5 mm2 with stranded ferruled)
• Max. current carrying capacity 16 A
• Machine soldered terminal block,
use of heat-resistant plastic means no
cover for the terminal block facing the
soldering bath is required
• Large plus-minus screws enable high
tightening torques
• High-voltage test complying with IEC 60 439-1
• Printed circuit board density t = 1.5 mm and
1 mm possible
Артикул: 1325506
• Width 22,5 / 45 / 67,5 / 90 mm
• Max. 16 / 32 / 48 / 64 box terminals
• Large, variable front plate surface
• Large cross section of connections possible
(e.g. 2 x 1.5 mm2 with stranded ferruled)
• Max. current carrying capacity 16 A
• Machine soldered terminal block,
use of heat-resistant plastic means no
cover for the terminal block facing the
soldering bath is required
• Large plus-minus screws enable high
tightening torques
• High-voltage test complying with IEC 60 439-1
• Printed circuit board density t = 1.5 mm and
1 mm possible
• Max. 16 / 32 / 48 / 64 box terminals
• Large, variable front plate surface
• Large cross section of connections possible
(e.g. 2 x 1.5 mm2 with stranded ferruled)
• Max. current carrying capacity 16 A
• Machine soldered terminal block,
use of heat-resistant plastic means no
cover for the terminal block facing the
soldering bath is required
• Large plus-minus screws enable high
tightening torques
• High-voltage test complying with IEC 60 439-1
• Printed circuit board density t = 1.5 mm and
1 mm possible
Артикул: 1325505
• Width 22,5 / 45 / 67,5 / 90 mm
• Max. 16 / 32 / 48 / 64 box terminals
• Large, variable front plate surface
• Large cross section of connections possible
(e.g. 2 x 1.5 mm2 with stranded ferruled)
• Max. current carrying capacity 16 A
• Machine soldered terminal block,
use of heat-resistant plastic means no
cover for the terminal block facing the
soldering bath is required
• Large plus-minus screws enable high
tightening torques
• High-voltage test complying with IEC 60 439-1
• Printed circuit board density t = 1.5 mm and
1 mm possible
• Max. 16 / 32 / 48 / 64 box terminals
• Large, variable front plate surface
• Large cross section of connections possible
(e.g. 2 x 1.5 mm2 with stranded ferruled)
• Max. current carrying capacity 16 A
• Machine soldered terminal block,
use of heat-resistant plastic means no
cover for the terminal block facing the
soldering bath is required
• Large plus-minus screws enable high
tightening torques
• High-voltage test complying with IEC 60 439-1
• Printed circuit board density t = 1.5 mm and
1 mm possible
Артикул: 1325541
• Width 150 mm
• Max. 32 plus-minus-terminal screws with
self raising terminals washers
• Double contacts for direct insertion of PCB
• PCBs are easy to install because of
guiding ribs
• Terminal cover for contact protection
complies with VBG 4 as option
• Max. 32 plus-minus-terminal screws with
self raising terminals washers
• Double contacts for direct insertion of PCB
• PCBs are easy to install because of
guiding ribs
• Terminal cover for contact protection
complies with VBG 4 as option
Артикул: 1325540
• Width 100 mm
• Max. 20 plus-minus-terminal screws with
self raising terminal washers
• PCBs are easy to install because of
guiding ribs
• Terminal cover for contact protection
complies with VBG 4 as option
• Max. 20 plus-minus-terminal screws with
self raising terminal washers
• PCBs are easy to install because of
guiding ribs
• Terminal cover for contact protection
complies with VBG 4 as option
Артикул: 1325539
• Width 75 mm
• Max. 16 plus-minus-terminal screws with
self raising terminals washers
• PCBs are easy to install because of
guiding ribs
• Terminal cover for contact protection
complies with VBG 4 as option
• Changeable front plate as option
• Max. 16 plus-minus-terminal screws with
self raising terminals washers
• PCBs are easy to install because of
guiding ribs
• Terminal cover for contact protection
complies with VBG 4 as option
• Changeable front plate as option
Артикул: 1325538
• Width 75 mm
• Max. 16 plus-minus-terminal screws with
self raising terminal washers
• PCBs are easy to install because of
guiding ribs
• Terminal cover for contact protection
complies with VBG 4 as option
• a base section for this enclosure is also
available without screw fixing recesses e.g.
suitable for DIN-rail mounting only
• Changeable Plate as option
• Max. 16 plus-minus-terminal screws with
self raising terminal washers
• PCBs are easy to install because of
guiding ribs
• Terminal cover for contact protection
complies with VBG 4 as option
• a base section for this enclosure is also
available without screw fixing recesses e.g.
suitable for DIN-rail mounting only
• Changeable Plate as option
Артикул: 1325537
• Width 55 mm
• Max. 12 plus-minus-terminal
screws with self raising terminal washers
• PCBs are easy to install because of
guiding ribs
• Terminal cover for contact protection
complies with VBG 4 as option
• Max. 12 plus-minus-terminal
screws with self raising terminal washers
• PCBs are easy to install because of
guiding ribs
• Terminal cover for contact protection
complies with VBG 4 as option
Артикул: 1325536
• Width 100 mm
• Max. 20 plus-minus-terminal screws with
self raising terminals washers
• PCBs are easy to install because of
guiding ribs
• Terminal cover for contact protection
complies with VBG 4 as option
• Max. 20 plus-minus-terminal screws with
self raising terminals washers
• PCBs are easy to install because of
guiding ribs
• Terminal cover for contact protection
complies with VBG 4 as option
Артикул: 1325535
• Width 45 mm
• Max. 20 plus-minus-terminal screws with
self raising terminal washers
• PCBs are easy to install because of
guiding ribs
• Terminal cover for contact protection
complies with VBG 4 as option
• Max. 20 plus-minus-terminal screws with
self raising terminal washers
• PCBs are easy to install because of
guiding ribs
• Terminal cover for contact protection
complies with VBG 4 as option
Артикул: 1325534
• Width 45 mm
• Max. 10 plus-minus-terminal screws with
self raising terminal washers
• PCBs are easy to install because of
guiding ribs
• Terminal cover for contact protection
complies with VBG 4 as option
• Max. 10 plus-minus-terminal screws with
self raising terminal washers
• PCBs are easy to install because of
guiding ribs
• Terminal cover for contact protection
complies with VBG 4 as option
7 different enclosure series for installation in industrial cabinets
You are looking for an universal enclosure solution for your electronic? We offer the suitable enclosure for your application. Dold now offers 7 different Series for installation in industrial cabinets / distribution boards which means that, no matter what the application, there is always an enclosure for the job. All these Series provide several width sizes, screw-terminals or plug-in terminals, different colours and customised options.
Свяжитесь с нами
Если вы не нашли нужной информации на сайте или у вас остались вопросы по товарам, оставьте заявку на бесплатную консультацию, и мы вам перезвоним
Ответ от производителя может занять до 5 дней и более.
