Safety light barriers Schmersal
• 2 safety contacts
• 2 Signalling outputs
• notice: Produkt im Auslauf, mehr Informationen beim Technischen Vertrieb
• Universal angle to mount BF 31, BF 50 (a higher degree of freedom) or to mount deflecting mirror SMA 80 onto a plane surface
• 1 safety contact
• 1 Signalling output
• Vertical deflection
• Horizontal deflection
• connector plug can be rotated
• connector plug can be rotated
Application:
Optoelectronic safety device are used as entry, danger point or danger zone guards.
SLB range safety light barriers ar utilised as entry guards to dangerous areas. these protection devices operating without physical contact achieve Control Category 2 or 4 to EN 954-1 in combination with SLB 200-C or SLB 400-C safety monitoring modules.
Design and mode of operation:
On the SLB/SLC/SLG ranges of optoelectronic safety devices, the emitter and receiver are fitted in two separate enclosures. An invisible infra-red signal is sent from the emitter and this is picked up by the lens system of the receiver and evaluated either by an integral or external safety monitoring module. If the light beam is interrupted, the secure outputs are switched.
All of the optoelectronic safety devices listed here are maintenance-free and are characterised by simple fitting and adjustment.
Ответ от производителя может занять до 5 дней и более.
