Safety switch with separate actuator Schmersal
• The actuator is independent from the centring device.
• Smooth insertion or retraction of the actuator
• The actuator is independent from the centring device.
• Smooth insertion or retraction of the actuator
• Subsequent adjustment enabled
• Suitable for all conventional profile systems
• To prevent inadvertent closing, e.g. during maintenance
• For complex plant
• Prevents actuation of the switch
• Lockout tag with 5 circular holes
• To prevent inadvertent closing, e.g. during maintenance
• For complex plant
• Prevents actuation of the switch
• Lockout tag with 5 circular holes
• The actuator is independent from the centring device.
• Smooth insertion or retraction of the actuator
• The actuator is independent from the centring device.
• Smooth insertion or retraction of the actuator
• To prevent inadvertent closing, e.g. during maintenance
• For complex plant
• Prevents actuation of the switch
• Lockout tag with 3 circular holes
• To prevent inadvertent closing, e.g. during maintenance
• For complex plant
• Prevents actuation of the switch
• Lockout tag with 3 circular holes
• Suitable for all types of guard
• Subsequent adjustment enabled
• Suitable for all conventional profile systems
• Suitable for all types of guard
• Suitable for all types of guard
• Suitable for all types of guard
• Suitable for all types of guard
• Suitable for all types of guard
• Suitable for all types of guard
• Suitable for all types of guard
Application:
Safety switches with separate actuators are suitable for sliding, hinged and particularly removable safety guards, which need to be closed to ensure the necessary operational security. They are also suitable for fitting on profile sections and existing equipment.
In combination with safety control modules all safety switches with class 2 shown in this chapter achieve Control Category 3 or 4 to EN ISO 13849-1.
Design and mode of operation:
On the safety switches with class 2, the switching element is not physically connected to the actuator but functionally brought together or separated for switching. When the guarding device is opened, the actuator is separated from the base unit. In the process, NC contacts are positively opened and NO contacts closed.
Enclosure rating of all the safety switches is IP 67. The safety switches can be fitted in any desired mounting position.
Ответ от производителя может занять до 5 дней и более.
