ABB – высокотехнологичная компания, лидирующая в разработке систем автоматизации промышленных производств. Её история началась ещё 130 лет назад, и сейчас филиалы ABB работают в 100 странах, а количество служащих превышает 135,000 человек.
Уже более 40 лет специалисты ABB занимаются разработкой инновационных технологий цифрового соединения и управления промышленным оборудованием и системами. За это время на предприятиях заказчиков были установлены и введены в эксплуатацию 70,000 систем управления, объединяющие более 70 миллионов устройств.
Каждый день компания выпускает новые решения безопасности, эффективности и продуктивности для коммунальной и промышленной сферы, транспорта и инфраструктуры по всему миру.
Вся продукция, системы и комплексные решения ABB разрабатываются с заботой об окружающей среде. Вредное воздействие на природу снижается за счёт повышения энергоэффективности и продуктивности оборудования.
Закажите в нашем магазине
Нужна редкая деталь? Закажем оригинал или надёжный аналог из Европы, США или Китая — по договору и с «белой» таможенной очисткой.
Catalog Description:FCA/S1.2.2.2 Fan Coil Actuator, 0-10V, MDRC
Long Description:Controls typical fan coil units by two analogue outputs for 0 - 10 V valve drives and a 3 channel output for fan with up to 3 stages. A additional load (up to 16 A) like a auxiliary heating can be controlled by a switch output. Window sensors, condensed
Catalog Description:FCA/S1.1.2.2 Fan Coil Actuator, PWM, MDRC
Long Description:To control typical fan coil units by four electronic outputs for thermoelectric or motor-driven valve drives and a 3 channel output for a up to 3-stage fan. Also a additional load (up to 16 A) like a auxiliary heating can be controlled by a switch output.
Catalog Description:FCA/S1.1.1.2 Fan Coil Actuator, PWM, MDRC
Long Description:Control typical fan coil units by four electronic outputs for thermoelectric or motor-driven valve drives and a 3 channel output for a fan with up to 3 stages. Also a additional load (up to 16 A) like a auxiliary heating can be controlled by a switch outp
Catalog Description:FCA/S1.2.1.2 Fan Coil Actuator, 0-10V, MDRC
Long Description:Controls typical fan coil units by two analogue outputs for 0 - 10 V valve drives and a 3 channel output for fan with up to 3 stages. Also a additional load (up to 16 A) like a auxiliary heating can be controlled by a switch output. Window sensors, conden
Long Description:The Analogue Actuator converts KNX telegrams in voltage or current signals. These analogue output signals are used to influence regulatory processes. For example, devices for heating, air conditioning or ventilation applications can be adjusted in their operation depending on the information, which are transmitted via the bus system. This Analogue Actuator is a 4-fold DIN rail device. The ABB i-bus Tool is supported for advanced diagnosis and improved commissioning.
Catalog Description:AA/A2.1.2 Analouge Actuator, 2-fold, SM
Long Description:The Analogue Actuator converts KNX telegrams in voltage signals. These analogue output signals are used to influence regulatory processes. For example, devices for heating, air conditioning or ventilation applications can be adjusted in their operation depending on the information, which are transmitted via the bus system. This Analogue Actuator is a 2-fold device with a housing for surface mounting. The ABB i-bus Tool is supported for advanced diagnosis and improved commissioning.
Long Description:The drive is a proportional valve drive for controlling heating valves and is mounted on thermostat valve bases. Valve Adapters VA10, VA78 for conventional valves are supplied. The control is carried out via a continuous KNX room thermostat. The actual va
Catalog Description:VA/Z10.1 Valve Adapter, M 30 X 1.5
Long Description:The Valve Adapter is used for the snap-on mounting of Thermoelectric _x000D_ Valve Drives TSA/K 230.1 and TSA/K 24.1 on valve bases or in heating circuit _x000D_ distributors. The adapter is compatible for valves of Dumser, Chronatherm, _x000D_ Vescal and
Catalog Description:VA/Z50.1 Valve Adapter, M 30 X 1.5
Long Description:The Valve Adapter is used for the snap-on mounting of Thermoelectric _x000D_ Valve Drives TSA/K 230.1 and TSA/K 24.1 on valve bases or in heating circuit _x000D_ distributors. The adapter is compatible for valves of Honeywell, Reich, Cazzaniga, _x000D_ La
Long Description:The Valve Adapter is used for the snap-on mounting of Thermoelectric _x000D_ Valve Drives TSA/K 230.1 and TSA/K 24.1 on valve bases or in heating circuit _x000D_ distributors. The adapter is compatible for Danfoss RA.
Catalog Description:VA/Z80.1 Valve Adapter, M 30 X 1.5
Long Description:The Valve Adapter is used for the snap-on mounting of Thermoelectric _x000D_ Valve Drives TSA/K 230.1 and TSA/K 24.1 on valve bases or in heating circuit _x000D_ distributors. The adapter is compatible for valves of Heimeier, Herb, Onda, _x000D_ Schlösser
Long Description:Controls up to 13 thermoelectric valve drives (24 V), max. 4 per channel. Installation in heating circuit distribution systems where the application of a triac ensures noiseless switching of the drives. Mains plug on the transformer (230 V).
Catalog Description:ISM/S5.1 IP Switch Master, 5 Port, MDRC
Long Description:IP Switch Master for MDRC installation. For networking of up to 5 end devices. Can be extended to 10 end devices by side connection of the IP Switch Slave (ISS/S). One of the ports is a Gigabit Ethernet enabled and can serve as an uplink port.
Catalog Description:ISS/S5.1 IP Switch Slave, 5 Port, MDRC
Long Description:IP Switch Slave for MDRC installation. For networking of up to 5 end devices. Can be side connected to the IP Switch Master (ISM/S), accordingly can be extended to 10 end devices. The slave is only functional together with the master.
Catalog Description:LGS/A1.1 Air Quality Sensor, SM
Long Description:The Air Quality Sensor (CO2 sensor) accurately measures the CO2 concentration, _x000D_ humidity and temperature in a room. Three independent thresholds can be set for the CO2 concentration and the relative humidity in addition to a threshold for the te
Catalog Description:FW/S8.2.1 Radio Time Switch, 8-ch, MDRC
Long Description:The Radio Time Switch sends current time and date on the bus. The time can be optionally received via a DCF or GPS antenna. Furthermore the device can be used to easily adjust the time programs.
Catalog Description:FAG/A1.1 GPS Antenna for Radio Time Sw.
Long Description:For the connection to the Radio Time Switch FW/S 8.2.1. The device receives time and date via GPS signal which is available worldwide.
Catalog Description:PS/E2.1 Programming Set for Time Sw.
Long Description:Contains a CD ROM with the Obelisk top2 for the creation of switching programs for the Radio Time Switch FW/S 8.2.1, a memory card PK/E 2.1 and a USB programming adapter for the memory card.