Long Description:The square junction box AP9V (2,5 mm², 440 V) is equipped with 10 membrane cable entries (Ø 17 mm) in the sides, and two in the bottom. Cables are easy to connect by simply inserting the stripped ends through the inlets. The box locks by snapping and can be opened by inserting a screwdriver (for example) into the opening slots - no screws are needed. The box can be furnished with strain-reliefs AS9, AS9.1 and AS9.3. Fits Ø 6 - 15,5 mm cable. VDE-approved. Mounting temperature -15...+60 °C. Made of halogen free material (IEC/61249-2-21).
Long Description:The new strain relief inlet AS12.4 offer more opportunities for installations with insulated cable._x000D__x000D_The AS12.4 strain relief is used in insulated cable mounting to secure max. 5 x 2,5 mm2 cables in the 20 mm inlets of mounting or junction boxes._x000D__x000D_The strain relief can also be used with a 20 mm AJ20 conduit extension e.g. in the transition between conduit and insulated cable installation._x000D__x000D_Made of halogen free material (IEC/61249-2-21)
Long Description:Wall clamps offer a rapid means of attaching a mounting box to a 12-13 mm thick board wall. Wall clamp AS8.13 is available for 12 - 13 mm. The hole is made with an AT5 hole saw (Ø 74 mm), and the board clamps are placed on either side of the board. The box is pushed through the hole from behind the board, and becomes locked between the board clamps.