Position switch Schmersal
• Symmetric enclosure
• Protection class IP66, IP67
• m Pre-wired cable right, 2
• Slow action 2 Opener (NC) with Staggered contacts
• Symmetric enclosure
• Protection class IP66, IP67
• m Pre-wired cable right, 2
• Slow action 2 Normally open contact (NO) / 1 Opener (NC)
• Symmetric enclosure
• Protection class IP66, IP67
• m Pre-wired cable right, 2
• Slow action 1 Normally open contact (NO) / 2 Opener (NC)
• Symmetric enclosure
• Protection class IP66, IP67
• m Pre-wired cable right, 2
• Slow action with overlapping contacts 1 Normally open contact (NO) / 1 Opener (NC)
• Symmetric enclosure
• Protection class IP66, IP67
• m Pre-wired cable right, 2
• Slow action 1 Normally open contact (NO) / 1 Opener (NC)
• Symmetric enclosure
• Protection class IP66, IP67
• m Pre-wired cable right, 2
• Snap action 1 Normally open contact (NO) / 1 Opener (NC)
• with latching
• Symmetric enclosure
• Protection class IP66, IP67
• m Pre-wired cable right, 2
• Snap action 1 Normally open contact (NO) / 2 Opener (NC)
• Symmetric enclosure
• Protection class IP66, IP67
• connector plug M12, right
• Snap action 1 Normally open contact (NO) / 1 Opener (NC)
• Symmetric enclosure
• Protection class IP66, IP67
• m Pre-wired cable right, 2
• Snap action 1 Normally open contact (NO) / 1 Opener (NC)
• Wide range of alternative actuators
• Good resistance to oil and petroleum spirit
• 66,7 mm x 76 mm x 38 mm
• 3 cable entries lateral M 20 x 1.5
• Actuator heads can be repositioned by 4 x 90°
• Mounting details to EN 50041
• Switching points to EN 50041
• Actuation from bottom parallel to the switch, therefore only suitable for small housings.
• Wide range of alternative actuators
• Good resistance to oil and petroleum spirit
• 66,7 mm x 76 mm x 38 mm
• 3 cable entries lateral M 20 x 1.5
• Actuator heads can be repositioned by 4 x 90°
• Mounting details to EN 50041
• Switching points to EN 50041
• Actuation from bottom parallel to the switch, therefore only suitable for small housings.
• Wide range of alternative actuators
• Good resistance to oil and petroleum spirit
• 66,7 mm x 76 mm x 38 mm
• 3 cable entries lateral M 20 x 1.5
• Actuator heads can be repositioned by 4 x 90°
• Mounting details to EN 50041
• Switching points to EN 50041
• Actuation from bottom parallel to the switch, therefore only suitable for small housings.
• Wide range of alternative actuators
• Good resistance to oil and petroleum spirit
• 66,7 mm x 76 mm x 38 mm
• 3 cable entries lateral M 20 x 1.5
• Actuator heads can be repositioned by 4 x 90°
• Mounting details to EN 50041
• Switching points to EN 50041
• Actuation from bottom parallel to the switch, therefore only suitable for small housings.
• Wide range of alternative actuators
• Good resistance to oil and petroleum spirit
• 66,7 mm x 76 mm x 38 mm
• 3 cable entries lateral M 20 x 1.5
• Actuator heads can be repositioned by 4 x 90°
• Mounting details to EN 50041
• Switching points to EN 50041
• Actuation from bottom parallel to the switch, therefore only suitable for small housings.
• Wide range of alternative actuators
• Good resistance to oil and petroleum spirit
• 66,7 mm x 76 mm x 38 mm
• 3 cable entries lateral M 20 x 1.5
• Actuator heads can be repositioned by 4 x 90°
• Mounting details to EN 50041
• Switching points to EN 50041
• Actuation from bottom parallel to the switch, therefore only suitable for small housings.
• Wide range of alternative actuators
• Good resistance to oil and petroleum spirit
• 66,7 mm x 76 mm x 38 mm
• 3 cable entries lateral M 20 x 1.5
• Actuator heads can be repositioned by 4 x 90°
• Mounting details to EN 50041
• Switching points to EN 50041
• Actuation from bottom parallel to the switch, therefore only suitable for small housings.
• Wide range of alternative actuators
• Good resistance to oil and petroleum spirit
• 66,7 mm x 76 mm x 38 mm
• 3 cable entries lateral M 20 x 1.5
• Actuator heads can be repositioned by 4 x 90°
• Mounting details to EN 50041
• Switching points to EN 50041
• Actuation from bottom parallel to the switch, therefore only suitable for small housings.
• Wide range of alternative actuators
• Good resistance to oil and petroleum spirit
• 66,7 mm x 76 mm x 38 mm
• 3 cable entries lateral M 20 x 1.5
• Actuator heads can be repositioned by 4 x 90°
• Mounting details to EN 50041
• Switching points to EN 50041
• Actuation from bottom parallel to the switch, therefore only suitable for small housings.
• Wide range of alternative actuators
• Good resistance to oil and petroleum spirit
• 66,7 mm x 76 mm x 38 mm
• 3 cable entries lateral M 20 x 1.5
• Actuator heads can be repositioned by 4 x 90°
• Mounting details to EN 50041
• Switching points to EN 50041
• Actuation from bottom parallel to the switch, therefore only suitable for small housings.
• Wide range of alternative actuators
• Good resistance to oil and petroleum spirit
• 66,7 mm x 76 mm x 38 mm
• Snap action with constant contact pressure up to switching point
• 3 cable entries lateral M 20 x 1.5
• Actuator heads can be repositioned by 4 x 90°
• Mounting details to EN 50041
• Switching points to EN 50041
• Actuation from bottom parallel to the switch, therefore only suitable for small housings.
Application:
Position switches with safety function are suitable for sliding and hinged safety guards which need to be closed to ensure the necessary operational security.
In combination with safety monitoring modules all position switches class 1 shown in this chapter achieve Control Category 3 or 4 to EN 954-1.
Further applications for positions switches class 1 are most varied positioning duties. The variety of requirements to be found in practice can be met in detail by means of a wide range of actuating elements.
Design and mode of operation:
On the position switches class 1 the guarding device and the positive break NC contact are positively linked.
Enclosure rating of all the safety switches is IP 67. The safety switches can be fitted in any desired mounting position.






Ответ от производителя может занять до 5 дней и более.

