Safety technology DOLD

• Speed monitoring module for 1 to 2 axes
• Terminal blocks for connecting 2 proximity sensors
• Available with 0,1 or 2RJ45 sockets for connecting encoders (TTl, HTL, sin/cos)
• Speed pre-selection, with or without direction monitoring. Up to 4 speed thresholds can be   
  configured.
• Speed window monitoring
• Standstill monitoring
• For rotational or linear movements
• For simple expansion of SAFEMASTER PRO via DIN rai lbus (IN-RAIL-BUS)
• For safety applications up to PLe / cat. 4 or SIL 3
• Status LEDs for comprehensive diagnostics
• Installation width: 22,5 mm

• Speed monitoring module for 1 to 2 axes
• Terminal blocks for connecting 2 proximity sensors
• Available with 0,1 or 2RJ45 sockets for connecting encoders (TTl, HTL, sin/cos)
• Speed pre-selection, with or without direction monitoring. Up to 4 speed thresholds can be   
  configured.
• Speed window monitoring
• Standstill monitoring
• For rotational or linear movements
• For simple expansion of SAFEMASTER PRO via DIN rai lbus (IN-RAIL-BUS)
• For safety applications up to PLe / cat. 4 or SIL 3
• Status LEDs for comprehensive diagnostics
• Installation width: 22,5 mm

• Speed monitoring module for 1 to 2 axes
• Terminal blocks for connecting 2 proximity sensors
• Available with 0,1 or 2RJ45 sockets for connecting encoders (TTl, HTL, sin/cos)
• Speed pre-selection, with or without direction monitoring. Up to 4 speed thresholds can be   
  configured.
• Speed window monitoring
• Standstill monitoring
• For rotational or linear movements
• For simple expansion of SAFEMASTER PRO via DIN rai lbus (IN-RAIL-BUS)
• For safety applications up to PLe / cat. 4 or SIL 3
• Status LEDs for comprehensive diagnostics
• Installation width: 22,5 mm

• Speed monitoring module for 1 to 2 axes
• Terminal blocks for connecting 2 proximity sensors
• Available with 0,1 or 2RJ45 sockets for connecting encoders (TTl, HTL, sin/cos)
• Speed pre-selection, with or without direction monitoring. Up to 4 speed thresholds can be   
  configured.
• Speed window monitoring
• Standstill monitoring
• For rotational or linear movements
• For simple expansion of SAFEMASTER PRO via DIN rai lbus (IN-RAIL-BUS)
• For safety applications up to PLe / cat. 4 or SIL 3
• Status LEDs for comprehensive diagnostics
• Installation width: 22,5 mm

• Speed monitoring module for 1 to 2 axes
• Terminal blocks for connecting 2 proximity sensors
• Available with 0,1 or 2RJ45 sockets for connecting encoders (TTl, HTL, sin/cos)
• Speed pre-selection, with or without direction monitoring. Up to 4 speed thresholds can be   
  configured.
• Speed window monitoring
• Standstill monitoring
• For rotational or linear movements
• For simple expansion of SAFEMASTER PRO via DIN rai lbus (IN-RAIL-BUS)
• For safety applications up to PLe / cat. 4 or SIL 3
• Status LEDs for comprehensive diagnostics
• Installation width: 22,5 mm

• 8 safety, single-channel inputs, dual-channel connection in pairs
• 2 seaprate safety, dual-channel outputs (OSSD)
• 1 Feedback circuit each für every safety output with individual
configurable reset
• 4 separate test outputs for sensor monitoring
• To extend Safemaster Pro via DIN rail bus (IN-Rail Bus)
in an easy way
• Status LEDs and 2 programmable status outputs for diagnosis
• With pluggable terminal block for easy exchange of devices

• Relay contact extension of the OSSDs of Safemaster Pro
• UG 6912.14: 1 relay output with 2 NO safety contacts and
1 NC monitoring contact
UG 6912.28: 2 relay output with 2 NO safety contacts each and
1 NC monitoring contact
• Status LEDs for power and output
• With pluggable terminal block for easy exchange of devices

• Relay contact extension of the OSSDs of Safemaster Pro
• UG 6912.14: 1 relay output with 2 NO safety contacts and
1 NC monitoring contact
UG 6912.28: 2 relay output with 2 NO safety contacts each and
1 NC monitoring contact
• Status LEDs for power and output
• With pluggable terminal block for easy exchange of devices

• 2 or 4 safety dual channel semiconductor outputs (OSSD),
separate control in pairs
• To extend Safemaster Pro via DIN rail bus (IN-Rail Bus)
in an easy way
• One feedback circuit for each of the 2 or 4 safety outputs with individual
start options
• Status LEDs and 2 programmable status outputs for diagnosis
• With pluggable terminal block for easy exchange of devices

• 2 or 4 safety dual channel semiconductor outputs (OSSD),
separate control in pairs
• To extend Safemaster Pro via DIN rail bus (IN-Rail Bus)
in an easy way
• One feedback circuit for each of the 2 or 4 safety outputs with individual
start options
• Status LEDs and 2 programmable status outputs for diagnosis
• With pluggable terminal block for easy exchange of devices

• 8, 12 or 16 safety, single-channel inputs, single-channel connection in pairs
• 4 (UG 6913.08 and UG 6913.16) e.g. 8 (UG 6913.12) test outputs
for sensor monitoring
• To extend Safemaster Pro via DIN rail bus (IN-Rail Bus)
in an easy way
• Status LEDs for comprehensive diagnosis
• With pluggable terminal block for easy exchange of devices

• 8, 12 or 16 safety, single-channel inputs, single-channel connection in pairs
• 4 (UG 6913.08 and UG 6913.16) e.g. 8 (UG 6913.12) test outputs
for sensor monitoring
• To extend Safemaster Pro via DIN rail bus (IN-Rail Bus)
in an easy way
• Status LEDs for comprehensive diagnosis
• With pluggable terminal block for easy exchange of devices

• 8, 12 or 16 safety, single-channel inputs, single-channel connection in pairs
• 4 (UG 6913.08 and UG 6913.16) e.g. 8 (UG 6913.12) test outputs
for sensor monitoring
• To extend Safemaster Pro via DIN rail bus (IN-Rail Bus)
in an easy way
• Status LEDs for comprehensive diagnosis
• With pluggable terminal block for easy exchange of devices

• Monitoring of opto electronical sensors, light curtains, magnetic
actuated sensors, E-stop buttons, safety mats, mechanical switches,
two-hand control
• 8 safety, single-channel inputs, dual-channel connection in pairs
• 2 safety, dual-channel outputs (OSSD)
• 4 separate test outputs for sensor monitoring
• 1 Feedback circuit each für every safety output with individual
configurable reset
• Configuration by PC via Mini USB Port
• Using as stand alone unit possible
• Indicator output, status-LEDs and bus connection via field bus
modules for comprehensive diagnostics
• With pluggable terminal block for easy exchange of devices

• For transmitting the status information from the control unit and the input
modules, e.g. input and error states, start button and safety output
assignments, to a control system or bus-capable display
• Electrical isolation
• Automatic recognition of transmission speed
• LED indicators for operating voltage and status
• Width of 45 mm

• For transmitting the status information from the control unit and the input
modules, e.g. input and error states, start button and safety output
assignments, to a control system or bus-capable display
• Galvanic separation
• Adjustment of transmission via rotary switch
• LED indicators for operating voltage and status
• Width 22,5 mm

• According to
- Performance Level (PL) e and category 4 to EN ISO 13849-1: 2008
- SIL Claimed Level (SIL CL) 3 to IEC/EN 62061
- Safety Integrity Level (SIL 3) to IEC/EN 61508
• Safety outputs can be assigned to one or several function modules
(control unit or input modules).
• Outputs:
- 4 NO contacts
- 3 NO contacts, 1 NC contact
- 3 NO contacts 0-3 s delay-release time-delay relay
- 2 NO contacts, 1 NC contact 0-3 s delay-release time-delay relay
• Permanently monitored feedback loop for external contact reinforcement
• LEDs for status indication
• Width 22.5 mm

• According to
- Performance Level (PL) e and category 4 to EN ISO 13849-1: 2008
- SIL Claimed Level (SIL CL) 3 to IEC/EN 62061
- Safety Integrity Level (SIL 3) to IEC/EN 61508
• Safety outputs can be assigned to one or several function modules
(control unit or input modules).
• Outputs:
- 4 NO contacts
- 3 NO contacts, 1 NC contact
- 3 NO contacts 0-3 s delay-release time-delay relay
- 2 NO contacts, 1 NC contact 0-3 s delay-release time-delay relay
• Permanently monitored feedback loop for external contact reinforcement
• LEDs for status indication
• Width 22.5 mm

• According to
- Performance Level (PL) e and category 4 to EN ISO 13849-1: 2008
- SIL Claimed Level (SIL CL) 3 to IEC/EN 62061
- Safety Integrity Level (SIL 3) to IEC/EN 61508
• Safety outputs can be assigned to one or several function modules
(control unit or input modules).
• Outputs:
- 4 NO contacts
- 3 NO contacts, 1 NC contact
- 3 NO contacts 0-3 s delay-release time-delay relay
- 2 NO contacts, 1 NC contact 0-3 s delay-release time-delay relay
• Permanently monitored feedback loop for external contact reinforcement
• LEDs for status indication
• Width 22.5 mm

• According to
- Performance Level (PL) e and category 4 to EN ISO 13849-1: 2008
- SIL Claimed Level (SIL CL) 3 to IEC/EN 62061
- Safety Integrity Level (SIL 3) to IEC/EN 61508
• Safety outputs can be assigned to one or several function modules
(control unit or input modules).
• Outputs:
- 4 NO contacts
- 3 NO contacts, 1 NC contact
- 3 NO contacts 0-3 s delay-release time-delay relay
- 2 NO contacts, 1 NC contact 0-3 s delay-release time-delay relay
• Permanently monitored feedback loop for external contact reinforcement
• LEDs for status indication
• Width 22.5 mm