Data transmission/control components Leuze
Power supply (14)
Data transmission (108)
- The ASM1 AS-i safety monitor is the core component of the AS‑Interface Safety at Work system. Using configuration software, it monitors the safety-related network devices that are assigned to it, e.g., command devices, Multiple Light Beam Safety Devices and Safety Switches.
- The ASM1 AS-i safety monitor is the core component of the AS‑Interface Safety at Work system. Using configuration software, it monitors the safety-related network devices that are assigned to it, e.g., command devices, Multiple Light Beam Safety Devices and Safety Switches.
- In addition to the functions of the ASM 1, this safety monitor offers higher-level start and E-Stop functions through safe coupling of adjacent AS-i networks. Moreover, safe activation of decentrally distributed AS-i actuators with the same AS-i address is possible.
- In addition to the functions of the ASM 1, this safety monitor offers higher-level start and E-Stop functions through safe coupling of adjacent AS-i networks. Moreover, safe activation of decentrally distributed AS-i actuators with the same AS-i address is possible.
- In addition to the functions of the ASM 1, this safety monitor offers higher-level start and E-Stop functions through safe coupling of adjacent AS-i networks. Moreover, safe activation of decentrally distributed AS-i actuators with the same AS-i address is possible.
- In addition to the functions of the ASM 1, this safety monitor offers higher-level start and E-Stop functions through safe coupling of adjacent AS-i networks. Moreover, safe activation of decentrally distributed AS-i actuators with the same AS-i address is possible.
- PBM: Redundancy modules for optimum load management and safeguarding against failure
- PLM: electronic load circuit monitoring and protection of circuits
- PBM: Redundancy modules for optimum load management and safeguarding against failure
- PLM: electronic load circuit monitoring and protection of circuits
- PBM: Redundancy modules for optimum load management and safeguarding against failure
- PLM: electronic load circuit monitoring and protection of circuits
- PBM: Redundancy modules for optimum load management and safeguarding against failure
- PLM: electronic load circuit monitoring and protection of circuits
- Adjustable stable power supply units with 24-28 VDC
- Alarm contacts for temperature, overload for remote diagnosis
- High overload capacity
- Push-in clamps suitable for many cross sections
- 1 phase standard design PSU110 with 2.5/5/10A
- Compact heat optimized PSU2x0 in 1 and 3 phase from 5 to 40 A
- Direct switchover to parallel
- Adjustable stable power supply units with 24-28 VDC
- Alarm contacts for temperature, overload for remote diagnosis
- High overload capacity
- Push-in clamps suitable for many cross sections
- 1 phase standard design PSU110 with 2.5/5/10A
- Compact heat optimized PSU2x0 in 1 and 3 phase from 5 to 40 A
- Direct switchover to parallel
- Adjustable stable power supply units with 24-28 VDC
- Alarm contacts for temperature, overload for remote diagnosis
- High overload capacity
- Push-in clamps suitable for many cross sections
- 1 phase standard design PSU110 with 2.5/5/10A
- Compact heat optimized PSU2x0 in 1 and 3 phase from 5 to 40 A
- Direct switchover to parallel
- Adjustable stable power supply units with 24-28 VDC
- Alarm contacts for temperature, overload for remote diagnosis
- High overload capacity
- Push-in clamps suitable for many cross sections
- 1 phase standard design PSU110 with 2.5/5/10A
- Compact heat optimized PSU2x0 in 1 and 3 phase from 5 to 40 A
- Direct switchover to parallel
- Adjustable stable power supply units with 24-28 VDC
- Alarm contacts for temperature, overload for remote diagnosis
- High overload capacity
- Push-in clamps suitable for many cross sections
- 1 phase standard design PSU110 with 2.5/5/10A
- Compact heat optimized PSU2x0 in 1 and 3 phase from 5 to 40 A
- Direct switchover to parallel
- Adjustable stable power supply units with 24-28 VDC
- Alarm contacts for temperature, overload for remote diagnosis
- High overload capacity
- Push-in clamps suitable for many cross sections
- 1 phase standard design PSU110 with 2.5/5/10A
- Compact heat optimized PSU2x0 in 1 and 3 phase from 5 to 40 A
- Direct switchover to parallel
- Adjustable stable power supply units with 24-28 VDC
- Alarm contacts for temperature, overload for remote diagnosis
- High overload capacity
- Push-in clamps suitable for many cross sections
- 1 phase standard design PSU110 with 2.5/5/10A
- Compact heat optimized PSU2x0 in 1 and 3 phase from 5 to 40 A
- Direct switchover to parallel
- Adjustable stable power supply units with 24-28 VDC
- Alarm contacts for temperature, overload for remote diagnosis
- High overload capacity
- Push-in clamps suitable for many cross sections
- 1 phase standard design PSU110 with 2.5/5/10A
- Compact heat optimized PSU2x0 in 1 and 3 phase from 5 to 40 A
- Direct switchover to parallel
- Adjustable stable power supply units with 24-28 VDC
- Alarm contacts for temperature, overload for remote diagnosis
- High overload capacity
- Push-in clamps suitable for many cross sections
- 1 phase standard design PSU110 with 2.5/5/10A
- Compact heat optimized PSU2x0 in 1 and 3 phase from 5 to 40 A
- Direct switchover to parallel
- Adjustable stable power supply units with 24-28 VDC
- Alarm contacts for temperature, overload for remote diagnosis
- High overload capacity
- Push-in clamps suitable for many cross sections
- 1 phase standard design PSU110 with 2.5/5/10A
- Compact heat optimized PSU2x0 in 1 and 3 phase from 5 to 40 A
- Direct switchover to parallel

Свяжитесь с нами
Если вы не нашли нужной информации на сайте или у вас остались вопросы по товарам, оставьте заявку на бесплатную консультацию, и мы вам перезвоним








Ответ от производителя может занять до 5 дней и более.

