Safe switching and monitoring Schmersal
Key transfer system (53)
Foot switch (6)
Enabling device (3)
Control panels (46)
Solenoid interlock (227)
Position switch (824)
Safety sensors (235)
• Suitable for food processing industry
• Concealed mounting possible
• 52 mm x 90 mm x 32 mm
• Long life
• no mechanical wear
• Insensitive to transverse misalignment
• Insensitive to soiling
• Connector M12, 8-pole
• Thermoplastic enclosure
• Safety switches must be used as end stop
• 40 mm x 179 mm x 40 mm
• Electronic contact-free, coded system
• Variably adjustable latching
• 3 LEDs to show operating conditions
• Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 3 mm horizontally
• Intelligent diagnosis
• Self-monitoring series-wiring of 31 sensors
• connector plug M12, 8-pole
• Power to lock
• enabling signal, when safety guard closed and locked (without force monitoring)
• Thermoplastic enclosure
• Safety switches must be used as end stop
• 40 mm x 179 mm x 40 mm
• Electronic contact-free, coded system
• Variably adjustable latching
• 3 LEDs to show operating conditions
• Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 3 mm horizontally
• Intelligent diagnosis
• Self-monitoring series-wiring of 31 sensors
• connector plug M12, 8-pole
• Power to lock
• serial diagnostic output
• enabling signal, when safety guard closed and locked (without force monitoring)
• Thermoplastic enclosure
• Safety switches must be used as end stop
• 40 mm x 179 mm x 40 mm
• Electronic contact-free, coded system
• Variably adjustable latching
• 3 LEDs to show operating conditions
• Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 3 mm horizontally
• Intelligent diagnosis
• Self-monitoring series-wiring of 31 sensors
• connector plug M12, 8-pole
• Power to lock
• serial diagnostic output
• enabling signal, when safety
• Thermoplastic enclosure
• Safety switches must be used as end stop
• 40 mm x 179 mm x 40 mm
• Electronic contact-free, coded system
• Variably adjustable latching
• 3 LEDs to show operating conditions
• Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 3 mm horizontally
• Intelligent diagnosis
• Self-monitoring series-wiring of 31 sensors
• connector plug M12, 8-pole
• Power to lock
• enabling signal, when safety
• Interlock with protection against incorrect locking.
• Robust design
• Long life
• 2 cable entries M 20 x 1.5
• Cut clamp termination
• Adjustable ball latch to 400 N
• 2 switches in one enclosure
• Problem-free opening of stressed doors by means of bell-crank system
• Ex version available
• 130 mm x 100 mm x 46,5 mm
• Interlock with protection against incorrect locking.
• Robust design
• Long life
• 2 cable entries M 20 x 1.5
• Cut clamp termination
• Adjustable ball latch to 400 N
• 2 switches in one enclosure
• Problem-free opening of stressed doors by means of bell-crank system
• Ex version available
• 130 mm x 100 mm x 46,5 mm
• Interlock with protection against incorrect locking.
• Robust design
• Long life
• 2 cable entries M 20 x 1.5
• Cut clamp termination
• Adjustable ball latch to 400 N
• 2 switches in one enclosure
• Problem-free opening of stressed doors by means of bell-crank system
• Ex version available
• 130 mm x 100 mm x 46,5 mm
• Interlock with protection against incorrect locking.
• Robust design
• Long life
• 2 cable entries M 20 x 1.5
• Cut clamp termination
• Adjustable ball latch to 400 N
• 2 switches in one enclosure
• Problem-free opening of stressed doors by means of bell-crank system
• Ex version available
• 130 mm x 100 mm x 46,5 mm
• Interlock with protection against incorrect locking.
• Robust design
• Long life
• 2 cable entries M 20 x 1.5
• Cut clamp termination
• Adjustable ball latch to 400 N
• 2 switches in one enclosure
• Problem-free opening of stressed doors by means of bell-crank system
• Ex version available
• 130 mm x 100 mm x 46,5 mm
• Interlock with protection against incorrect locking.
• Robust design
• Long life
• 2 cable entries M 20 x 1.5
• Cut clamp termination
• Adjustable ball latch to 400 N
• 2 switches in one enclosure
• Problem-free opening of stressed doors by means of bell-crank system
• Ex version available
• 130 mm x 100 mm x 46,5 mm
• Interlock with protection against incorrect locking.
• Robust design
• Long life
• 2 cable entries M 20 x 1.5
• Cut clamp termination
• Adjustable ball latch to 400 N
• 2 switches in one enclosure
• Problem-free opening of stressed doors by means of bell-crank system
• Ex version available
• 130 mm x 100 mm x 46,5 mm
• Interlock with protection against incorrect locking.
• Robust design
• Long life
• 2 cable entries M 20 x 1.5
• Cut clamp termination
• Adjustable ball latch to 400 N
• 2 switches in one enclosure
• Problem-free opening of stressed doors by means of bell-crank system
• Ex version available
• 130 mm x 100 mm x 46,5 mm
• Interlock with protection against incorrect locking.
• Robust design
• Long life
• 2 cable entries M 20 x 1.5
• Cut clamp termination
• Adjustable ball latch to 400 N
• 2 switches in one enclosure
• Problem-free opening of stressed doors by means of bell-crank system
• Ex version available
• 130 mm x 100 mm x 46,5 mm
• Interlock with protection against incorrect locking.
• Robust design
• Long life
• 2 cable entries M 20 x 1.5
• Cut clamp termination
• Adjustable ball latch to 400 N
• 2 switches in one enclosure
• Problem-free opening of stressed doors by means of bell-crank system
• Ex version available
• 130 mm x 100 mm x 46,5 mm
• Interlock with protection against incorrect locking.
• Robust design
• Long life
• 2 cable entries M 20 x 1.5
• Cut clamp termination
• Adjustable ball latch to 400 N
• 2 switches in one enclosure
• Problem-free opening of stressed doors by means of bell-crank system
• Ex version available
• 130 mm x 100 mm x 46,5 mm
• Interlock with protection against incorrect locking.
• Robust design
• Long life
• 2 cable entries M 20 x 1.5
• Cut clamp termination
• Adjustable ball latch to 400 N
• 2 switches in one enclosure
• Problem-free opening of stressed doors by means of bell-crank system
• Ex version available
• Emergency exit
• 152 mm x 100 mm x 46,5 mm
• Interlock with protection against incorrect locking.
• Robust design
• Long life
• 2 cable entries M 20 x 1.5
• Cut clamp termination
• Adjustable ball latch to 400 N
• 2 switches in one enclosure
• Problem-free opening of stressed doors by means of bell-crank system
• Ex version available
• Manual release
• 141 mm x 100 mm x 46,5 mm
• Interlock with protection against incorrect locking.
• Robust design
• Long life
• 2 cable entries M 20 x 1.5
• Cut clamp termination
• Adjustable ball latch to 400 N
• 2 switches in one enclosure
• Problem-free opening of stressed doors by means of bell-crank system
• Ex version available
• Manual release
• 141 mm x 100 mm x 56,5 mm
• Interlock with protection against incorrect locking.
• Robust design
• Long life
• 2 cable entries M 20 x 1.5
• Cut clamp termination
• Adjustable ball latch to 400 N
• 2 switches in one enclosure
• Problem-free opening of stressed doors by means of bell-crank system
• Ex version available
• Emergency exit
• 152 mm x 100 mm x 46,5 mm

Свяжитесь с нами
Если вы не нашли нужной информации на сайте или у вас остались вопросы по товарам, оставьте заявку на бесплатную консультацию, и мы вам перезвоним















Ответ от производителя может занять до 5 дней и более.

