Safe switching and monitoring Schmersal

• Thermoplastic enclosure
• Non-contact safety switch
• Does not protrude into the door opening
• 119,5 mm x 140 mm x 43,3 mm
• Substitutes door-handle and safety switch, no further door fittings required
• Modern and symmetric design
• Tamper-proof because of integral coded safety sensor
• Ergonomic operation
• Suitable for hinged and sliding guards
• No protruding actuator
• Simple mounting with 4 Screws
• Connector M12 x 1, 8-pole

• Thermoplastic enclosure
• Non-contact safety switch
• Does not protrude into the door opening
• 119,5 mm x 140 mm x 43,3 mm
• Substitutes door-handle and safety switch, no further door fittings required
• Modern and symmetric design
• Tamper-proof because of integral coded safety sensor
• Ergonomic operation
• Suitable for hinged and sliding guards
• No protruding actuator
• Simple mounting with 4 Screws
• Connector M12 x 1, 8-pole

• Thermoplastic enclosure
• Non-contact safety switch
• Does not protrude into the door opening
• 119,5 mm x 140 mm x 43,3 mm
• Substitutes door-handle and safety switch, no further door fittings required
• Modern and symmetric design
• Tamper-proof because of integral coded safety sensor
• Ergonomic operation
• Suitable for hinged and sliding guards
• No protruding actuator
• Simple mounting with 4 Screws
• Pre-wired cable

• Thermoplastic enclosure
• Non-contact safety switch
• Does not protrude into the door opening
• 119,5 mm x 140 mm x 43,3 mm
• Substitutes door-handle and safety switch, no further door fittings required
• Modern and symmetric design
• Tamper-proof because of integral coded safety sensor
• Ergonomic operation
• Suitable for hinged and sliding guards
• No protruding actuator
• Simple mounting with 4 Screws
• Pre-wired cable

• Thermoplastic enclosure
• Non-contact safety switch
• Does not protrude into the door opening
• 119,5 mm x 140 mm x 43,3 mm
• Substitutes door-handle and safety switch, no further door fittings required
• Modern and symmetric design
• Tamper-proof because of integral coded safety sensor
• Ergonomic operation
• Suitable for hinged and sliding guards
• No protruding actuator
• Simple mounting with 4 Screws
• Pre-wired cable

• Thermoplastic enclosure
• Suitable for food processing industry
• Concealed mounting possible
• 52 mm x 90 mm x 32 mm
• Long life
• no mechanical wear
• Insensitive to transverse misalignment
• Insensitive to soiling
• Connector M12, 8-pole

• Thermoplastic enclosure
• Double-insulated
• Interlock with protection against incorrect locking.
• 130 mm x 90 mm x 30 mm
• 6 Contacts
• Long life
• Large wiring compartment
• Manual release, rear
• cable entries 4 M 16 x 1.5

• Thermoplastic enclosure
• Double-insulated
• Interlock with protection against incorrect locking.
• 130 mm x 90 mm x 30 mm
• 6 Contacts
• Long life
• Large wiring compartment
• Emergency exit, cover-side
• cable entries 4 M 16 x 1.5

• Thermoplastic enclosure
• Double-insulated
• Interlock with protection against incorrect locking.
• 130 mm x 90 mm x 30 mm
• 6 Contacts
• Long life
• Large wiring compartment
• Emergency exit, rear
• cable entries 4 M 16 x 1.5

• Thermoplastic enclosure
• Double-insulated
• Interlock with protection against incorrect locking.
• 130 mm x 90 mm x 30 mm
• 6 Contacts
• Long life
• Large wiring compartment
• Manual release, cover-side
• cable entries 4 M 16 x 1.5

• Thermoplastic enclosure
• Double-insulated
• Interlock with protection against incorrect locking.
• 130 mm x 90 mm x 30 mm
• 6 Contacts
• Long life
• Large wiring compartment
• Emergency exit, cover-side
• cable entries 4 M 16 x 1.5

• Thermoplastic enclosure
• Double-insulated
• Interlock with protection against incorrect locking.
• 130 mm x 90 mm x 30 mm
• 6 Contacts
• Long life
• Large wiring compartment
• Emergency exit, rear
• cable entries 4 M 16 x 1.5

• Thermoplastic enclosure
• Electronic contact-free, coded system
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• 1 x connector plug M12, 8-pole
• Actuation from side
• without edge monitoring of the enabling pushbutton, suitable for automatic start
• To control positive-guided relay without downstream safety monitoring module
• Suitable as individual or terminal device in series-wiring of standards sensors to replace a safety monitoring module
• Self-monitored series-wiring of up to 30 CSS 34 sensors and one CSS 34F0/F1 sensor for control category 4 to EN ISO 13849-1

• Thermoplastic enclosure
• Suitable for food processing industry
• Concealed mounting possible
• 52 mm x 90 mm x 32 mm
• Long life
• no mechanical wear
• Insensitive to transverse misalignment
• Insensitive to soiling
• Connector M12, 8-pole

• One-hand emergency exit,
even in de-energised condition
• Actuator for hinged guards
• Easy and intuitive operation
• With door detection sensor T
• No risk of injury from protruding actuator
• No supplementary door handles required
• Does not protrude into the door opening
• Various handles available

• Thermoplastic enclosure
• Electronic contact-free, coded system
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• 1 x connector plug M12, 8-pole
• Actuation from side
• with edge monitoring of the reset pushbutton
• To control positive-guided relay without downstream safety monitoring module
• Suitable as individual or terminal device in series-wiring of standards sensors to replace a safety monitoring module
• Self-monitored series-wiring of up to 30 CSS 34 sensors and one CSS 34F0/F1 sensor for control category 4 to EN ISO 13849-1

• Thermoplastic enclosure
• Electronic contact-free, coded system
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• 1 x connector plug M12, 8-pole
• without edge monitoring of the enabling pushbutton, suitable for automatic start
• To control positive-guided relay without downstream safety monitoring module
• Suitable as individual or terminal device in series-wiring of standards sensors to replace a safety monitoring module
• Self-monitored series-wiring of up to 30 CSS 34 sensors and one CSS 34F0/F1 sensor for control category 4 to EN ISO 13849-1

• Thermoplastic enclosure
• Guard locking monitored
• Electronic contact-free, coded system
• serial diagnostic output
• Max. length of the sensor chain 200 m
• Self-monitoring series-wiring of 31 sensors
• 3 LEDs to show operating conditions
• Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 3 mm horizontally
• Intelligent diagnosis
• Manual release

• Thermoplastic enclosure
• Long life
• no mechanical wear
• 88 mm x 25 mm x 13 mm
• Concealed mounting possible
• Insensitive to transverse misalignment
• Insensitive to soiling
• Connector M8, 4-pole, Latching interlocking

• Thermoplastic enclosure
• Long life
• no mechanical wear
• 88 mm x 25 mm x 13 mm
• Concealed mounting possible
• Insensitive to transverse misalignment
• Insensitive to soiling
• Connector 8 mm, 6-pole, Latching interlocking