Safety sensors Schmersal
Показано товаров: 20 из 235
Артикул: 282603
• Stainless steel enclosure
• Max. 31 sensors can be wired in series.
• Connector M12, 8-pole
• Ø M30
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• Max. 31 sensors can be wired in series.
• Connector M12, 8-pole
• Ø M30
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
Артикул: 282602
• Metal enclosure
• Max. 16 sensors can be wired in series.
• Pre-wired cable, 7-pole
• Ø M30
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• Max. 16 sensors can be wired in series.
• Pre-wired cable, 7-pole
• Ø M30
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
Артикул: 282601
• Thermoplastic enclosure
• Electronic contact-free, coded system
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• 1 x Pre-wired cable 8-pole
• Actuation from top
• Max. 31 sensors can be wired in series.
• Electronic contact-free, coded system
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• 1 x Pre-wired cable 8-pole
• Actuation from top
• Max. 31 sensors can be wired in series.
Артикул: 282600
• Thermoplastic enclosure
• Electronic contact-free, coded system
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• 1 x connector plug M12, 8-pole
• Actuation from top
• Max. 31 sensors can be wired in series.
• Electronic contact-free, coded system
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• 1 x connector plug M12, 8-pole
• Actuation from top
• Max. 31 sensors can be wired in series.
Артикул: 282599
• Thermoplastic enclosure
• Electronic contact-free, coded system
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• 1 x Pre-wired cable 8-pole
• Actuation from top
• serial diagnostic output
• Max. 31 sensors can be wired in series.
• Electronic contact-free, coded system
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• 1 x Pre-wired cable 8-pole
• Actuation from top
• serial diagnostic output
• Max. 31 sensors can be wired in series.
Артикул: 282598
• Thermoplastic enclosure
• Electronic contact-free, coded system
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• 1 x connector plug M12, 8-pole
• Actuation from top
• serial diagnostic output
• Max. 31 sensors can be wired in series.
• Electronic contact-free, coded system
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• 1 x connector plug M12, 8-pole
• Actuation from top
• serial diagnostic output
• Max. 31 sensors can be wired in series.
Артикул: 282597
• Thermoplastic enclosure
• Electronic contact-free, coded system
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• 1 x connector plug M12, 8-pole
• Actuation from top
• with edge monitoring of the reset pushbutton
• To control positive-guided relay without downstream safety monitoring module
• Suitable as individual or terminal device in series-wiring of standards sensors to replace a safety monitoring module
• Self-monitored series-wiring of up to 30 CSS 34 sensors and one CSS 34F0/F1 sensor for control category 4 to EN ISO 13849-1
• Electronic contact-free, coded system
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• 1 x connector plug M12, 8-pole
• Actuation from top
• with edge monitoring of the reset pushbutton
• To control positive-guided relay without downstream safety monitoring module
• Suitable as individual or terminal device in series-wiring of standards sensors to replace a safety monitoring module
• Self-monitored series-wiring of up to 30 CSS 34 sensors and one CSS 34F0/F1 sensor for control category 4 to EN ISO 13849-1
Артикул: 282596
• Thermoplastic enclosure
• Electronic contact-free, coded system
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• 1 x connector plug M12, 8-pole
• without edge monitoring of the enabling pushbutton, suitable for automatic start
• To control positive-guided relay without downstream safety monitoring module
• Suitable as individual or terminal device in series-wiring of standards sensors to replace a safety monitoring module
• Self-monitored series-wiring of up to 30 CSS 34 sensors and one CSS 34F0/F1 sensor for control category 4 to EN ISO 13849-1
• Electronic contact-free, coded system
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• 1 x connector plug M12, 8-pole
• without edge monitoring of the enabling pushbutton, suitable for automatic start
• To control positive-guided relay without downstream safety monitoring module
• Suitable as individual or terminal device in series-wiring of standards sensors to replace a safety monitoring module
• Self-monitored series-wiring of up to 30 CSS 34 sensors and one CSS 34F0/F1 sensor for control category 4 to EN ISO 13849-1
Артикул: 282595
• Thermoplastic enclosure
• Electronic contact-free, coded system
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• 1 x Pre-wired cable 8-pole
• Actuation from side
• Max. 31 sensors can be wired in series.
• Electronic contact-free, coded system
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• 1 x Pre-wired cable 8-pole
• Actuation from side
• Max. 31 sensors can be wired in series.
Артикул: 282594
• Thermoplastic enclosure
• Electronic contact-free, coded system
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• 1 x connector plug M12, 8-pole
• Actuation from side
• Max. 31 sensors can be wired in series.
• Electronic contact-free, coded system
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• 1 x connector plug M12, 8-pole
• Actuation from side
• Max. 31 sensors can be wired in series.
Артикул: 282592
• Thermoplastic enclosure
• Electronic contact-free, coded system
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• 1 x connector plug M12, 8-pole
• Actuation from side
• serial diagnostic output
• Max. 31 sensors can be wired in series.
• Electronic contact-free, coded system
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• 1 x connector plug M12, 8-pole
• Actuation from side
• serial diagnostic output
• Max. 31 sensors can be wired in series.
Артикул: 282593
• Thermoplastic enclosure
• Electronic contact-free, coded system
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• 1 x Pre-wired cable 8-pole
• Actuation from side
• serial diagnostic output
• Max. 31 sensors can be wired in series.
• Electronic contact-free, coded system
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• 1 x Pre-wired cable 8-pole
• Actuation from side
• serial diagnostic output
• Max. 31 sensors can be wired in series.
Артикул: 282591
• Thermoplastic enclosure
• Electronic contact-free, coded system
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• 1 x connector plug M12, 8-pole
• Actuation from side
• with edge monitoring of the reset pushbutton
• To control positive-guided relay without downstream safety monitoring module
• Suitable as individual or terminal device in series-wiring of standards sensors to replace a safety monitoring module
• Self-monitored series-wiring of up to 30 CSS 34 sensors and one CSS 34F0/F1 sensor for control category 4 to EN ISO 13849-1
• Electronic contact-free, coded system
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• 1 x connector plug M12, 8-pole
• Actuation from side
• with edge monitoring of the reset pushbutton
• To control positive-guided relay without downstream safety monitoring module
• Suitable as individual or terminal device in series-wiring of standards sensors to replace a safety monitoring module
• Self-monitored series-wiring of up to 30 CSS 34 sensors and one CSS 34F0/F1 sensor for control category 4 to EN ISO 13849-1
Артикул: 282590
• Thermoplastic enclosure
• Electronic contact-free, coded system
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• 1 x connector plug M12, 8-pole
• Actuation from side
• without edge monitoring of the enabling pushbutton, suitable for automatic start
• To control positive-guided relay without downstream safety monitoring module
• Suitable as individual or terminal device in series-wiring of standards sensors to replace a safety monitoring module
• Self-monitored series-wiring of up to 30 CSS 34 sensors and one CSS 34F0/F1 sensor for control category 4 to EN ISO 13849-1
• Electronic contact-free, coded system
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• 1 x connector plug M12, 8-pole
• Actuation from side
• without edge monitoring of the enabling pushbutton, suitable for automatic start
• To control positive-guided relay without downstream safety monitoring module
• Suitable as individual or terminal device in series-wiring of standards sensors to replace a safety monitoring module
• Self-monitored series-wiring of up to 30 CSS 34 sensors and one CSS 34F0/F1 sensor for control category 4 to EN ISO 13849-1
Артикул: 282589
• Thermoplastic enclosure
• Pre-wired cable 4-pole
• Electronic contact-free, coded system
• Misaligned actuation possible
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• Early warning when operating near the limit of the sensor"s hysteris range
• Self-monitoring series-wiring of 16 sensors
• 2 short-circuit proof PNP safety outputs
• Pre-wired cable 4-pole
• Electronic contact-free, coded system
• Misaligned actuation possible
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• Early warning when operating near the limit of the sensor"s hysteris range
• Self-monitoring series-wiring of 16 sensors
• 2 short-circuit proof PNP safety outputs
Артикул: 282588
• Pre-wired cable 5-pole
• Thermoplastic enclosure
• Electronic contact-free, coded system
• Comfortable diagnostics through sensor LED and electronic signalling output
• Misaligned actuation possible
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• Early warning when operating near the limit of the sensor"s hysteris range
• Self-monitoring series-wiring of 16 sensors
• 2 short-circuit proof PNP safety outputs
• Thermoplastic enclosure
• Electronic contact-free, coded system
• Comfortable diagnostics through sensor LED and electronic signalling output
• Misaligned actuation possible
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• Early warning when operating near the limit of the sensor"s hysteris range
• Self-monitoring series-wiring of 16 sensors
• 2 short-circuit proof PNP safety outputs
Артикул: 282587
• Connector M12, 4-pole
• Thermoplastic enclosure
• Electronic contact-free, coded system
• Misaligned actuation possible
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• Early warning when operating near the limit of the sensor"s hysteris range
• Self-monitoring series-wiring of 16 sensors
• 2 short-circuit proof PNP safety outputs
• Thermoplastic enclosure
• Electronic contact-free, coded system
• Misaligned actuation possible
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• Early warning when operating near the limit of the sensor"s hysteris range
• Self-monitoring series-wiring of 16 sensors
• 2 short-circuit proof PNP safety outputs
Артикул: 282586
• Thermoplastic enclosure
• Connector M12, 5-pole
• Electronic contact-free, coded system
• Comfortable diagnostics through sensor LED and electronic signalling output
• Misaligned actuation possible
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• Early warning when operating near the limit of the sensor"s hysteris range
• Self-monitoring series-wiring of 16 sensors
• 2 short-circuit proof PNP safety outputs
• Connector M12, 5-pole
• Electronic contact-free, coded system
• Comfortable diagnostics through sensor LED and electronic signalling output
• Misaligned actuation possible
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• Early warning when operating near the limit of the sensor"s hysteris range
• Self-monitoring series-wiring of 16 sensors
• 2 short-circuit proof PNP safety outputs
Артикул: 282584
• 2 x Connector M12, 4-pole
• Thermoplastic enclosure
• Electronic contact-free, coded system
• Misaligned actuation possible
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• Early warning when operating near the limit of the sensor"s hysteris range
• Self-monitoring series-wiring of 16 sensors
• 2 short-circuit proof PNP safety outputs
• Thermoplastic enclosure
• Electronic contact-free, coded system
• Misaligned actuation possible
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• Early warning when operating near the limit of the sensor"s hysteris range
• Self-monitoring series-wiring of 16 sensors
• 2 short-circuit proof PNP safety outputs
Артикул: 282585
• 2 x Pre-wired cable 4-pole
• Thermoplastic enclosure
• Electronic contact-free, coded system
• Misaligned actuation possible
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• Early warning when operating near the limit of the sensor"s hysteris range
• Self-monitoring series-wiring of 16 sensors
• 2 short-circuit proof PNP safety outputs
• Thermoplastic enclosure
• Electronic contact-free, coded system
• Misaligned actuation possible
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• Early warning when operating near the limit of the sensor"s hysteris range
• Self-monitoring series-wiring of 16 sensors
• 2 short-circuit proof PNP safety outputs
Application:
The magnetic safety sensors serve to monitor the position of sliding, hinged and removable safety guards. Sensors without integral evaluation can only be used for safety duties to DIN VDE 0660-209 in combination with a safety guard monitor for protection up to Control Category 4 to EN ISO 13849-1.
The use of magnetic safety sensors is of particular advantage in cases where extremely dirty conditions can occur or high hygienic standards need to be maintained. This is provided by the simplicity of cleaning the units.
A further advantage is the facility for concealed mounting under non-magnetic materials. Working surfaces and storage areas can be arranged without the need for dust-collecting edges or other functionally required cut-outs or projections.
BNS range magnetic safety sensors can also be used in cases where a precise approach is not possible and greater tolerances are required.
Design and mode of operation:
These devices comprise a multi-channel magnetic safety sensors and an actuating magnet.
All magnetic safety sensors are in thermoplastic enclosures and protected to protection class IP 67 or 65.
Ответ от производителя может занять до 5 дней и более.
