Safety sensors Schmersal
• Thermoplastic enclosure
• Electronic contact-free, coded system
• Comfortable diagnostics through sensor LED and electronic signalling output
• Misaligned actuation possible
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• Early warning when operating near the limit of the sensor"s hysteris range
• Self-monitoring series-wiring of 16 sensors
• 2 short-circuit proof PNP safety outputs
• Thermoplastic enclosure
• Electronic contact-free, coded system
• Comfortable diagnostics through sensor LED and electronic signalling output
• Misaligned actuation possible
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• Early warning when operating near the limit of the sensor"s hysteris range
• Self-monitoring series-wiring of 16 sensors
• 2 short-circuit proof PNP safety outputs
• Thermoplastic enclosure
• Electronic contact-free, coded system
• Comfortable diagnostics through sensor LED and electronic signalling output
• Misaligned actuation possible
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• Early warning when operating near the limit of the sensor"s hysteris range
• Self-monitoring series-wiring of 16 sensors
• 2 short-circuit proof PNP safety outputs
• Non-contact safety switch
• Does not protrude into the door opening
• 119,5 mm x 140 mm x 43,3 mm
• Substitutes door-handle and safety switch, no further door fittings required
• Modern and symmetric design
• Tamper-proof because of integral coded safety sensor
• Ergonomic operation
• Suitable for hinged and sliding guards
• No protruding actuator
• Simple mounting with 4 Screws
• Pre-wired cable
• Non-contact safety switch
• Does not protrude into the door opening
• 119,5 mm x 140 mm x 43,3 mm
• Substitutes door-handle and safety switch, no further door fittings required
• Modern and symmetric design
• Tamper-proof because of integral coded safety sensor
• Ergonomic operation
• Suitable for hinged and sliding guards
• No protruding actuator
• Simple mounting with 4 Screws
• Pre-wired cable
• Non-contact safety switch
• Does not protrude into the door opening
• 119,5 mm x 140 mm x 43,3 mm
• Substitutes door-handle and safety switch, no further door fittings required
• Modern and symmetric design
• Tamper-proof because of integral coded safety sensor
• Ergonomic operation
• Suitable for hinged and sliding guards
• No protruding actuator
• Simple mounting with 4 Screws
• Pre-wired cable
• Non-contact safety switch
• Does not protrude into the door opening
• 119,5 mm x 140 mm x 43,3 mm
• Substitutes door-handle and safety switch, no further door fittings required
• Modern and symmetric design
• Tamper-proof because of integral coded safety sensor
• Ergonomic operation
• Suitable for hinged and sliding guards
• No protruding actuator
• Simple mounting with 4 Screws
• Connector M12 x 1, 8-pole
• Non-contact safety switch
• Does not protrude into the door opening
• 119,5 mm x 140 mm x 43,3 mm
• Substitutes door-handle and safety switch, no further door fittings required
• Modern and symmetric design
• Tamper-proof because of integral coded safety sensor
• Ergonomic operation
• Suitable for hinged and sliding guards
• No protruding actuator
• Simple mounting with 4 Screws
• Connector M12 x 1, 8-pole
• Non-contact safety switch
• Does not protrude into the door opening
• 119,5 mm x 140 mm x 43,3 mm
• Substitutes door-handle and safety switch, no further door fittings required
• Modern and symmetric design
• Tamper-proof because of integral coded safety sensor
• Ergonomic operation
• Suitable for hinged and sliding guards
• No protruding actuator
• Simple mounting with 4 Screws
• Connector M12 x 1, 8-pole
• Non-contact safety switch
• Does not protrude into the door opening
• 119,5 mm x 140 mm x 43,3 mm
• Substitutes door-handle and safety switch, no further door fittings required
• Modern and symmetric design
• Tamper-proof because of integral coded safety sensor
• Ergonomic operation
• Suitable for hinged and sliding guards
• No protruding actuator
• Simple mounting with 4 Screws
• Connector M12 x 1, 8-pole
• Non-contact safety switch
• Does not protrude into the door opening
• 119,5 mm x 140 mm x 43,3 mm
• Substitutes door-handle and safety switch, no further door fittings required
• Modern and symmetric design
• Tamper-proof because of integral coded safety sensor
• Ergonomic operation
• Suitable for hinged and sliding guards
• No protruding actuator
• Simple mounting with 4 Screws
• Pre-wired cable
• Non-contact safety switch
• Does not protrude into the door opening
• 119,5 mm x 140 mm x 43,3 mm
• Substitutes door-handle and safety switch, no further door fittings required
• Modern and symmetric design
• Tamper-proof because of integral coded safety sensor
• Ergonomic operation
• Suitable for hinged and sliding guards
• No protruding actuator
• Simple mounting with 4 Screws
• Pre-wired cable
• Long life
• no mechanical wear
• 40 mm x 112 mm x 40 mm
• Suitable for food processing industry
• Insensitive to transverse misalignment
• Insensitive to soiling
• Wiring compartment
• With integral evaluation
• 1 Cable entry M 20 x 1.5
• Non-contact safety switch
• Does not protrude into the door opening
• 119,5 mm x 140 mm x 43,3 mm
• Substitutes door-handle and safety switch, no further door fittings required
• Modern and symmetric design
• Tamper-proof because of integral coded safety sensor
• Ergonomic operation
• Suitable for hinged and sliding guards
• No protruding actuator
• Simple mounting with 4 Screws
• Pre-wired cable
• Long life
• no mechanical wear
• 40 mm x 112 mm x 40 mm
• Suitable for food processing industry
• Insensitive to transverse misalignment
• Insensitive to soiling
• Wiring compartment
• With integral evaluation
• 1 Cable entry M 20 x 1.5
• Long life
• no mechanical wear
• 40 mm x 112 mm x 40 mm
• Suitable for food processing industry
• Insensitive to transverse misalignment
• Insensitive to soiling
• Wiring compartment
• With integral evaluation
• 1 Cable entry M 20 x 1.5
• Long life
• no mechanical wear
• 40 mm x 112 mm x 40 mm
• Suitable for food processing industry
• Insensitive to transverse misalignment
• Insensitive to soiling
• Wiring compartment
• With integral evaluation
• 1 Cable entry M 20 x 1.5
• Long life
• no mechanical wear
• 40 mm x 112 mm x 40 mm
• Suitable for food processing industry
• Insensitive to transverse misalignment
• Insensitive to soiling
• Wiring compartment
• With integral evaluation
• 1 Cable entry M 20 x 1.5
• Small body
• Concealed mounting possible
• 26 mm x 36 mm x 13 mm
• Long life
• no mechanical wear
• Insensitive to transverse misalignment
• Insensitive to soiling
• Pre-wired cable
• Small body
• Concealed mounting possible
• 26 mm x 36 mm x 13 mm
• Long life
• no mechanical wear
• Insensitive to transverse misalignment
• Insensitive to soiling
• Pre-wired cable
Application:
The magnetic safety sensors serve to monitor the position of sliding, hinged and removable safety guards. Sensors without integral evaluation can only be used for safety duties to DIN VDE 0660-209 in combination with a safety guard monitor for protection up to Control Category 4 to EN ISO 13849-1.
The use of magnetic safety sensors is of particular advantage in cases where extremely dirty conditions can occur or high hygienic standards need to be maintained. This is provided by the simplicity of cleaning the units.
A further advantage is the facility for concealed mounting under non-magnetic materials. Working surfaces and storage areas can be arranged without the need for dust-collecting edges or other functionally required cut-outs or projections.
BNS range magnetic safety sensors can also be used in cases where a precise approach is not possible and greater tolerances are required.
Design and mode of operation:
These devices comprise a multi-channel magnetic safety sensors and an actuating magnet.
All magnetic safety sensors are in thermoplastic enclosures and protected to protection class IP 67 or 65.






Ответ от производителя может занять до 5 дней и более.

