Safety switch with separate actuator Schmersal
• Individual coding
• Coding level "High" according to ISO 14119
• 52 mm x 90 mm x 30 mm
• Long life
• Double-insulated
• Large wiring compartment
• High level of contact reliability with low voltages and currents
• Insensitive to soiling
• Slotted holes for adjustment, circular holes for location
• 3 cable entries M 16 x 1.5
• The magnetic latch can be easily fitted in any actuating plane
• Suitable for retrofitting
• Individual coding
• Coding level "High" according to ISO 14119
• 52 mm x 90 mm x 30 mm
• Long life
• Double-insulated
• Large wiring compartment
• High level of contact reliability with low voltages and currents
• Insensitive to soiling
• Slotted holes for adjustment, circular holes for location
• 3 cable entries M 16 x 1.5
• Suitable for retrofitting
• For play-free interlocking of light guards
• The magnetic latch can be easily fitted in any actuating plane
• Suitable for retrofitting
• For play-free interlocking of light guards
• Suitable for retrofitting
• For play-free interlocking of light guards
• The magnetic latch can be easily fitted in any actuating plane
• Suitable for retrofitting
• For play-free interlocking of light guards
• For separate mounting on the guard
• For complex plant
• Prevents actuation of the switch
• Up to 6 padlocks can be fitted
• The lockout tag can be mounted on a chain near to the safety switch
Application:
Safety switches with separate actuators are suitable for sliding, hinged and particularly removable safety guards, which need to be closed to ensure the necessary operational security. They are also suitable for fitting on profile sections and existing equipment.
In combination with safety control modules all safety switches with class 2 shown in this chapter achieve Control Category 3 or 4 to EN ISO 13849-1.
Design and mode of operation:
On the safety switches with class 2, the switching element is not physically connected to the actuator but functionally brought together or separated for switching. When the guarding device is opened, the actuator is separated from the base unit. In the process, NC contacts are positively opened and NO contacts closed.
Enclosure rating of all the safety switches is IP 67. The safety switches can be fitted in any desired mounting position.
Ответ от производителя может занять до 5 дней и более.
