Safety switch with separate actuator Schmersal
• Thermoplastic enclosure
• RFID-technology for needs-based protection against tampering
• 3 different directions of actuation
• Compact design
• 3 LEDs to show operating conditions
• Suitable for hinged and sliding guards
• Series-wiring
• Repeated individual coding with RFID technology
• Coding level "High" according to ISO 14119
• Connector M12, 8-pole
• serial diagnostic output
• Individual coding
• Thermoplastic enclosure
• RFID-technology for needs-based protection against tampering
• 3 different directions of actuation
• Compact design
• 3 LEDs to show operating conditions
• Suitable for hinged and sliding guards
• Series-wiring
• Repeated individual coding with RFID technology
• Coding level "High" according to ISO 14119
• Connector M12, 8-pole
• Diagnostic output
• Individual coding
• Thermoplastic enclosure
• RFID-technology for needs-based protection against tampering
• 3 different directions of actuation
• Compact design
• 3 LEDs to show operating conditions
• Suitable for hinged and sliding guards
• Series-wiring
• Individual coding with RFID technology
• Coding level "High" according to ISO 14119
• Connector M12, 8-pole
• serial diagnostic output
• Individual coding
• Thermoplastic enclosure
• RFID-technology for needs-based protection against tampering
• 3 different directions of actuation
• Compact design
• 3 LEDs to show operating conditions
• Suitable for hinged and sliding guards
• Series-wiring
• Universal coding with RFID technology
• Connector M12, 8-pole
• serial diagnostic output
• Thermoplastic enclosure
• RFID-technology for needs-based protection against tampering
• 3 different directions of actuation
• Compact design
• 3 LEDs to show operating conditions
• Suitable for hinged and sliding guards
• Series-wiring
• Universal coding with RFID technology
• Connector M12, 8-pole
• Diagnostic output
• Thermoplastic enclosure
• RFID-technology for needs-based protection against tampering
• 3 different directions of actuation
• Compact design
• 3 LEDs to show operating conditions
• Suitable for hinged and sliding guards
• Series-wiring
• Individual coding with RFID technology
• Coding level "High" according to ISO 14119
• Connector M12, 8-pole
• Diagnostic output
• Individual coding
• serial diagnostic output
• Max. length of the sensor chain 200 m
• Connector M12, 8-pole
• Self-monitoring series-wiring of 31 sensors
• 3 LEDs to show operating conditions
• Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 3 mm horizontally
• Intelligent diagnosis
• serial diagnostic output
• Screw connection
• Max. length of the sensor chain 200 m
• Self-monitoring series-wiring of 31 sensors
• 3 LEDs to show operating conditions
• Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 3 mm horizontally
• Intelligent diagnosis
• Connector M23, 8+1-pole
• Idle assignable pushbutton and LED
• Max. length of the sensor chain 200 m
• Self-monitoring series-wiring of 31 sensors
• 3 LEDs to show operating conditions
• Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 3 mm horizontally
• Intelligent diagnosis
• serial diagnostic output
• Spring pulley connection
• Max. length of the sensor chain 200 m
• Self-monitoring series-wiring of 31 sensors
• 3 LEDs to show operating conditions
• Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 3 mm horizontally
• Intelligent diagnosis
• Spring pulley connection
• Max. length of the sensor chain 200 m
• Self-monitoring series-wiring of 31 sensors
• 3 LEDs to show operating conditions
• Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 3 mm horizontally
• Intelligent diagnosis
• Screw connection
• Max. length of the sensor chain 200 m
• Self-monitoring series-wiring of 31 sensors
• 3 LEDs to show operating conditions
• Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 3 mm horizontally
• Intelligent diagnosis
• Connector M12, 8-pole
• Max. length of the sensor chain 200 m
• Self-monitoring series-wiring of 31 sensors
• 3 LEDs to show operating conditions
• Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 3 mm horizontally
• Intelligent diagnosis
• Latching handle
• Long life
• 40,5 mm x 114 mm x 38 mm
• High level of contact reliability with low voltages and currents
• 1 Cable entry M 20 x 1.5
• Latching handle
• Long life
• 40,5 mm x 114 mm x 38 mm
• High level of contact reliability with low voltages and currents
• 1 Cable entry M 20 x 1.5
• Latching handle
• Long life
• 40,5 mm x 114 mm x 38 mm
• High level of contact reliability with low voltages and currents
• 1 Cable entry M 20 x 1.5
• Actuating head rotated by 90°
• Latching handle
• Long life
• 40,5 mm x 114 mm x 38 mm
• High level of contact reliability with low voltages and currents
• 1 Cable entry M 20 x 1.5
• Actuating head rotated by 270°
• Latching handle
• Long life
• 40,5 mm x 114 mm x 38 mm
• High level of contact reliability with low voltages and currents
• 1 Cable entry M 20 x 1.5
• Actuating head rotated by 90°
• Latching handle
• Long life
• 40,5 mm x 114 mm x 38 mm
• High level of contact reliability with low voltages and currents
• 1 Cable entry M 20 x 1.5
• Actuating head rotated by 270°
• Small body
• 8 actuating planes
• 30 mm x 60 mm x 30 mm
• Multiple coding
• Long life
• Double-insulated
• High level of contact reliability with low voltages and currents
• Insensitive to soiling
• Front cable entry
• Can be retro-fitted
Application:
Safety switches with separate actuators are suitable for sliding, hinged and particularly removable safety guards, which need to be closed to ensure the necessary operational security. They are also suitable for fitting on profile sections and existing equipment.
In combination with safety control modules all safety switches with class 2 shown in this chapter achieve Control Category 3 or 4 to EN ISO 13849-1.
Design and mode of operation:
On the safety switches with class 2, the switching element is not physically connected to the actuator but functionally brought together or separated for switching. When the guarding device is opened, the actuator is separated from the base unit. In the process, NC contacts are positively opened and NO contacts closed.
Enclosure rating of all the safety switches is IP 67. The safety switches can be fitted in any desired mounting position.






Ответ от производителя может занять до 5 дней и более.

