Safe signal processing Schmersal
Input expander (12)
Output expanders (3)
Показано товаров: 20 из 170
Артикул: 282763
• Fail-safe standstill monitors
• Sensor-free detection of standstill by monitoring e.m.f.
• Direct connection to three-phase motors
• Suitable for connection to a frequency converter with the following interface date: rotary hysteresis 0 ... 1000 Hz; switching frequency of the end level up to 16 kHz; engine voltage range 0 ... 400 V
• This fail-safe standstill monitor has the particular advantage that no adjustment for a required-value is needed during comissioning.
• 3 safety contacts, STOP 0
• 1 Signalling output
• Sensor-free detection of standstill by monitoring e.m.f.
• Direct connection to three-phase motors
• Suitable for connection to a frequency converter with the following interface date: rotary hysteresis 0 ... 1000 Hz; switching frequency of the end level up to 16 kHz; engine voltage range 0 ... 400 V
• This fail-safe standstill monitor has the particular advantage that no adjustment for a required-value is needed during comissioning.
• 3 safety contacts, STOP 0
• 1 Signalling output
Артикул: 282762
• Fail-safe standstill monitors
• Sensor-free detection of standstill by monitoring e.m.f.
• Direct connection to three-phase motors
• Suitable for connection to a frequency converter with the following interface date: rotary hysteresis 0 ... 1000 Hz; switching frequency of the end level up to 16 kHz; engine voltage range 0 ... 400 V
• This fail-safe standstill monitor has the particular advantage that no adjustment for a required-value is needed during comissioning.
• 3 safety contacts, STOP 0
• 1 Signalling output
• Sensor-free detection of standstill by monitoring e.m.f.
• Direct connection to three-phase motors
• Suitable for connection to a frequency converter with the following interface date: rotary hysteresis 0 ... 1000 Hz; switching frequency of the end level up to 16 kHz; engine voltage range 0 ... 400 V
• This fail-safe standstill monitor has the particular advantage that no adjustment for a required-value is needed during comissioning.
• 3 safety contacts, STOP 0
• 1 Signalling output
Артикул: 282761
• Fail-safe standstill monitors
• Sensor-free detection of standstill by monitoring e.m.f.
• Direct connection to three-phase motors
• Suitable for connection to a frequency converter with the following interface date: rotary hysteresis 0 ... 1000 Hz; switching frequency of the end level up to 16 kHz; engine voltage range 0 ... 400 V
• This fail-safe standstill monitor has the particular advantage that no adjustment for a required-value is needed during comissioning.
• 3 safety contacts, STOP 0
• 1 Signalling output
• Sensor-free detection of standstill by monitoring e.m.f.
• Direct connection to three-phase motors
• Suitable for connection to a frequency converter with the following interface date: rotary hysteresis 0 ... 1000 Hz; switching frequency of the end level up to 16 kHz; engine voltage range 0 ... 400 V
• This fail-safe standstill monitor has the particular advantage that no adjustment for a required-value is needed during comissioning.
• 3 safety contacts, STOP 0
• 1 Signalling output
Артикул: 282760
• Fail-safe standstill monitors
• Sensor-free detection of standstill by monitoring e.m.f.
• Direct connection to three-phase motors
• Suitable for connection to a frequency converter with the following interface date: rotary hysteresis 0 ... 1000 Hz; switching frequency of the end level up to 16 kHz; engine voltage range 0 ... 400 V
• This fail-safe standstill monitor has the particular advantage that no adjustment for a required-value is needed during comissioning.
• 3 safety contacts, STOP 0
• 1 Signalling output
• Sensor-free detection of standstill by monitoring e.m.f.
• Direct connection to three-phase motors
• Suitable for connection to a frequency converter with the following interface date: rotary hysteresis 0 ... 1000 Hz; switching frequency of the end level up to 16 kHz; engine voltage range 0 ... 400 V
• This fail-safe standstill monitor has the particular advantage that no adjustment for a required-value is needed during comissioning.
• 3 safety contacts, STOP 0
• 1 Signalling output
Артикул: 282783
• Fail-safe delay timer
• Time adjustable from 0,1 s to 99 min
• 3 safety contacts
• 2 Signalling outputs
• Time adjustable from 0,1 s to 99 min
• 3 safety contacts
• 2 Signalling outputs
Артикул: 282782
• Fail-safe delay timer
• Time adjustable from 0,1 s to 99 min
• 3 safety contacts
• 2 Signalling outputs
• Time adjustable from 0,1 s to 99 min
• 3 safety contacts
• 2 Signalling outputs
Артикул: 282781
• Fail-safe delay timer
• Time adjustable from 0,1 s to 99 min
• 3 safety contacts
• 2 Signalling outputs
• Time adjustable from 0,1 s to 99 min
• 3 safety contacts
• 2 Signalling outputs
Артикул: 282795
• Passives Verteilermodul
• Cage clamps
•
• Protection class IP00
• Cage clamps
•
• Protection class IP00
Артикул: 282794
• Passives Verteilermodul
• Cage clamps
•
• Protection class IP00
• Cage clamps
•
• Protection class IP00
Артикул: 282793
• Input expander
• Possibility to connect up to 4 sensors with non-isolated signals, e.g. the CSS products from Schmersal as well as AOPD’s (only PROTECT-PE-02)
• Input for up to 4 sensors per interface e.g.: magnetic safety switches type BNS, emergency stop devices, interlocking devices and others
• 2 safety contacts
• Signalling output for each sensor (monitoring of both circuits of the sensors) and and all sensors (Y5, group signal)
• Possibility to connect up to 4 sensors with non-isolated signals, e.g. the CSS products from Schmersal as well as AOPD’s (only PROTECT-PE-02)
• Input for up to 4 sensors per interface e.g.: magnetic safety switches type BNS, emergency stop devices, interlocking devices and others
• 2 safety contacts
• Signalling output for each sensor (monitoring of both circuits of the sensors) and and all sensors (Y5, group signal)
Артикул: 282792
• Input expander
• Possibility to connect up to 4 sensors with non-isolated signals, e.g. the CSS products from Schmersal as well as AOPD’s (only PROTECT-PE-02)
• Input for up to 4 sensors per interface e.g.: magnetic safety switches type BNS, emergency stop devices, interlocking devices and others
• 2 safety contacts
• Signalling output for each sensor (monitoring of both circuits of the sensors) and and all sensors (Y5, group signal)
• Possibility to connect up to 4 sensors with non-isolated signals, e.g. the CSS products from Schmersal as well as AOPD’s (only PROTECT-PE-02)
• Input for up to 4 sensors per interface e.g.: magnetic safety switches type BNS, emergency stop devices, interlocking devices and others
• 2 safety contacts
• Signalling output for each sensor (monitoring of both circuits of the sensors) and and all sensors (Y5, group signal)
Артикул: 282791
• Input expander
• Possibility to connect up to 4 sensors with non-isolated signals, e.g. the CSS products from Schmersal as well as AOPD’s (only PROTECT-PE-02)
• Input for up to 4 sensors per interface e.g.: magnetic safety switches type BNS, emergency stop devices, interlocking devices and others
• 2 safety contacts
• Signalling output for each sensor (monitoring of both circuits of the sensors) and and all sensors (Y5, group signal)
• Possibility to connect up to 4 sensors with non-isolated signals, e.g. the CSS products from Schmersal as well as AOPD’s (only PROTECT-PE-02)
• Input for up to 4 sensors per interface e.g.: magnetic safety switches type BNS, emergency stop devices, interlocking devices and others
• 2 safety contacts
• Signalling output for each sensor (monitoring of both circuits of the sensors) and and all sensors (Y5, group signal)
Артикул: 282790
• Input expander
• Possibility to connect up to 4 sensors with non-isolated signals, e.g. the CSS products from Schmersal as well as AOPD’s (only PROTECT-PE-02)
• Input for up to 4 sensors per interface e.g.: magnetic safety switches type BNS, emergency stop devices, interlocking devices and others
• 2 safety contacts
• Signalling output for each sensor (monitoring of both circuits of the sensors) and and all sensors (Y5, group signal)
• Possibility to connect up to 4 sensors with non-isolated signals, e.g. the CSS products from Schmersal as well as AOPD’s (only PROTECT-PE-02)
• Input for up to 4 sensors per interface e.g.: magnetic safety switches type BNS, emergency stop devices, interlocking devices and others
• 2 safety contacts
• Signalling output for each sensor (monitoring of both circuits of the sensors) and and all sensors (Y5, group signal)
Артикул: 282789
• with antivalent output contacts
• Input expander
• Possibility to connect up to 4 sensors with non-isolated signals, e.g. the CSS products from Schmersal as well as AOPD’s (only PROTECT-PE-02)
• Input for up to 4 sensors per interface e.g.: magnetic safety switches type BNS, emergency stop devices, interlocking devices and others
• 2 safety contacts
• Signalling output for each sensor (monitoring of both circuits of the sensors) and and all sensors (Y5, group signal)
• Input expander
• Possibility to connect up to 4 sensors with non-isolated signals, e.g. the CSS products from Schmersal as well as AOPD’s (only PROTECT-PE-02)
• Input for up to 4 sensors per interface e.g.: magnetic safety switches type BNS, emergency stop devices, interlocking devices and others
• 2 safety contacts
• Signalling output for each sensor (monitoring of both circuits of the sensors) and and all sensors (Y5, group signal)
Артикул: 282788
• with antivalent output contacts
• Input expander
• Possibility to connect up to 4 sensors with non-isolated signals, e.g. the CSS products from Schmersal as well as AOPD’s (only PROTECT-PE-02)
• Input for up to 4 sensors per interface e.g.: magnetic safety switches type BNS, emergency stop devices, interlocking devices and others
• 2 safety contacts
• Signalling output for each sensor (monitoring of both circuits of the sensors) and and all sensors (Y5, group signal)
• Input expander
• Possibility to connect up to 4 sensors with non-isolated signals, e.g. the CSS products from Schmersal as well as AOPD’s (only PROTECT-PE-02)
• Input for up to 4 sensors per interface e.g.: magnetic safety switches type BNS, emergency stop devices, interlocking devices and others
• 2 safety contacts
• Signalling output for each sensor (monitoring of both circuits of the sensors) and and all sensors (Y5, group signal)
Артикул: 282787
• Input expander
• Input for up to 4 sensors per interface e.g.: magnetic safety switches type BNS, emergency stop devices, interlocking devices and others
• 2 safety contacts
• Signalling output for each sensor (monitoring of both circuits of the sensors)
• Input for up to 4 sensors per interface e.g.: magnetic safety switches type BNS, emergency stop devices, interlocking devices and others
• 2 safety contacts
• Signalling output for each sensor (monitoring of both circuits of the sensors)
Артикул: 282786
• Input expander
• Input for up to 4 sensors per interface e.g.: magnetic safety switches type BNS, emergency stop devices, interlocking devices and others
• 2 safety contacts
• Signalling output for each sensor (monitoring of both circuits of the sensors)
• Input for up to 4 sensors per interface e.g.: magnetic safety switches type BNS, emergency stop devices, interlocking devices and others
• 2 safety contacts
• Signalling output for each sensor (monitoring of both circuits of the sensors)
Артикул: 282785
• Input expander
• Input for up to 4 sensors per interface e.g.: magnetic safety switches type BNS, emergency stop devices, interlocking devices and others
• 2 safety contacts
• Signalling output for each sensor (monitoring of both circuits of the sensors)
• Input for up to 4 sensors per interface e.g.: magnetic safety switches type BNS, emergency stop devices, interlocking devices and others
• 2 safety contacts
• Signalling output for each sensor (monitoring of both circuits of the sensors)
Артикул: 282784
• Input expander
• Input for up to 4 sensors per interface e.g.: magnetic safety switches type BNS, emergency stop devices, interlocking devices and others
• 2 safety contacts
• Signalling output for each sensor (monitoring of both circuits of the sensors)
• Input for up to 4 sensors per interface e.g.: magnetic safety switches type BNS, emergency stop devices, interlocking devices and others
• 2 safety contacts
• Signalling output for each sensor (monitoring of both circuits of the sensors)
Артикул: 284772
• 2 safety contacts
• Suitable for signal processing of emergency stop control devices, interlocking equipment, etc
• Automatic reset function
• Suitable for signal processing of emergency stop control devices, interlocking equipment, etc
• Automatic reset function
In the "Safe Signal Processing" section, you will find safety relay modules for various safety technology applications (e.g. for emergency stop and guard door monitoring) as well as centralised programmable safety controllers and decentralised field bus systems, e.g. a modular concept for safety functions control on small machines.
Свяжитесь с нами
Если вы не нашли нужной информации на сайте или у вас остались вопросы по товарам, оставьте заявку на бесплатную консультацию, и мы вам перезвоним
Ответ от производителя может занять до 5 дней и более.
