Safe signal processing Schmersal
Input expander (12)
Output expanders (3)
Показано товаров: 20 из 170
Артикул: 282758
• 1 oder 2-channel control
•
• 2 Safety outputs
• 4 Signalling outputs
•
• 2 Safety outputs
• 4 Signalling outputs
Артикул: 282757
• STOP 0 Function
• 1 oder 2-channel control
• Start button / Auto-start
• 2 Safety outputs 2 A
• 1 Signalling output
• 1 oder 2-channel control
• Start button / Auto-start
• 2 Safety outputs 2 A
• 1 Signalling output
Артикул: 282756
• STOP 0 Function
• 1 oder 2-channel control
• Start button / Auto-start
• Monitoring two-hand control panels to EN 574 IIIC
• 2 Safety outputs 5.5 A
• 1 Signalling output
• 1 oder 2-channel control
• Start button / Auto-start
• Monitoring two-hand control panels to EN 574 IIIC
• 2 Safety outputs 5.5 A
• 1 Signalling output
Артикул: 282780
• Detects standstill using 2 impulse sensor(s)
• 4 safety contacts
• 1 Signalling output
• 2 additional transistor outputs
2 additional transistor outputs
• 4 safety contacts
• 1 Signalling output
• 2 additional transistor outputs
2 additional transistor outputs
Артикул: 282779
• Detects standstill using 2 impulse sensor(s)
• 4 safety contacts
• 1 Signalling output
• 2 additional transistor outputs
2 additional transistor outputs
• 4 safety contacts
• 1 Signalling output
• 2 additional transistor outputs
2 additional transistor outputs
Артикул: 282778
• Detects standstill using 2 impulse sensor(s)
• 4 safety contacts
• 1 Signalling output
• 2 additional transistor outputs
2 additional transistor outputs
• 4 safety contacts
• 1 Signalling output
• 2 additional transistor outputs
2 additional transistor outputs
Артикул: 282777
• Detects standstill using 2 impulse sensor(s)
• 4 safety contacts
• 1 Signalling output
• 2 additional transistor outputs
2 additional transistor outputs
• 4 safety contacts
• 1 Signalling output
• 2 additional transistor outputs
2 additional transistor outputs
Артикул: 282776
• Detects standstill using 2 impulse sensor(s)
• 1 safety contact
• 2 Signalling outputs
• 1 safety contact
• 2 Signalling outputs
Артикул: 282774
• Detects standstill using 2 impulse sensor(s)
• 1 safety contact
• 2 Signalling outputs
• 1 safety contact
• 2 Signalling outputs
Артикул: 282775
• Detects standstill using 2 impulse sensor(s)
• 1 safety contact
• 2 Signalling outputs
• 1 safety contact
• 2 Signalling outputs
Артикул: 282773
• Detects standstill using 2 impulse sensor(s)
• 1 safety contact
• 2 Signalling outputs
• 1 safety contact
• 2 Signalling outputs
Артикул: 282772
• Detects standstill using 1 or 2 impulse sensors
• Uses additional standstill signal, e.g. PLC as second input channel
• 2 safety contacts
• 2 Signalling outputs
• Uses additional standstill signal, e.g. PLC as second input channel
• 2 safety contacts
• 2 Signalling outputs
Артикул: 282771
• Detects standstill using 1 or 2 impulse sensors
• Uses additional standstill signal, e.g. PLC as second input channel
• 2 safety contacts
• 2 Signalling outputs
• Uses additional standstill signal, e.g. PLC as second input channel
• 2 safety contacts
• 2 Signalling outputs
Артикул: 282770
• Detects standstill using 2 impulse sensor(s)
• 2 safety contacts
• 2 Signalling outputs
• 2 safety contacts
• 2 Signalling outputs
Артикул: 282769
• Detects standstill using 2 impulse sensor(s)
• 2 safety contacts
• 2 Signalling outputs
• 2 safety contacts
• 2 Signalling outputs
Артикул: 282768
• Detects standstill using 2 impulse sensor(s)
• 2 safety contacts
• 2 Signalling outputs
• 2 safety contacts
• 2 Signalling outputs
Артикул: 282767
• Fail-safe standstill monitors
• This fail-safe standstill monitor has the particular advantage that no adjustment for a required-value is needed during comissioning.
• 3 safety contacts, STOP 0
• Control category 4 to EN ISO 13849-1
• This fail-safe standstill monitor has the particular advantage that no adjustment for a required-value is needed during comissioning.
• 3 safety contacts, STOP 0
• Control category 4 to EN ISO 13849-1
Артикул: 282766
• Fail-safe standstill monitors
• This fail-safe standstill monitor has the particular advantage that no adjustment for a required-value is needed during comissioning.
• 3 safety contacts, STOP 0
• Control category 4 to EN ISO 13849-1
• This fail-safe standstill monitor has the particular advantage that no adjustment for a required-value is needed during comissioning.
• 3 safety contacts, STOP 0
• Control category 4 to EN ISO 13849-1
Артикул: 282765
• Fail-safe standstill monitors
• Sensor-free detection of standstill by monitoring e.m.f.
• Direct connection to three-phase motors
• Suitable for connection to a frequency converter with the following interface date: rotary hysteresis 0 ... 1000 Hz; switching frequency of the end level up to 16 kHz; engine voltage range 0 ... 400 V
• This fail-safe standstill monitor has the particular advantage that no adjustment for a required-value is needed during comissioning.
• 3 safety contacts, STOP 0
• 1 Signalling output
• Sensor-free detection of standstill by monitoring e.m.f.
• Direct connection to three-phase motors
• Suitable for connection to a frequency converter with the following interface date: rotary hysteresis 0 ... 1000 Hz; switching frequency of the end level up to 16 kHz; engine voltage range 0 ... 400 V
• This fail-safe standstill monitor has the particular advantage that no adjustment for a required-value is needed during comissioning.
• 3 safety contacts, STOP 0
• 1 Signalling output
Артикул: 282764
• Fail-safe standstill monitors
• Sensor-free detection of standstill by monitoring e.m.f.
• Direct connection to three-phase motors
• Suitable for connection to a frequency converter with the following interface date: rotary hysteresis 0 ... 1000 Hz; switching frequency of the end level up to 16 kHz; engine voltage range 0 ... 400 V
• This fail-safe standstill monitor has the particular advantage that no adjustment for a required-value is needed during comissioning.
• 3 safety contacts, STOP 0
• 1 Signalling output
• Sensor-free detection of standstill by monitoring e.m.f.
• Direct connection to three-phase motors
• Suitable for connection to a frequency converter with the following interface date: rotary hysteresis 0 ... 1000 Hz; switching frequency of the end level up to 16 kHz; engine voltage range 0 ... 400 V
• This fail-safe standstill monitor has the particular advantage that no adjustment for a required-value is needed during comissioning.
• 3 safety contacts, STOP 0
• 1 Signalling output
In the "Safe Signal Processing" section, you will find safety relay modules for various safety technology applications (e.g. for emergency stop and guard door monitoring) as well as centralised programmable safety controllers and decentralised field bus systems, e.g. a modular concept for safety functions control on small machines.
Свяжитесь с нами
Если вы не нашли нужной информации на сайте или у вас остались вопросы по товарам, оставьте заявку на бесплатную консультацию, и мы вам перезвоним
Ответ от производителя может занять до 5 дней и более.
