Safe switching and monitoring Schmersal
Key transfer system (53)
Foot switch (6)
Enabling device (3)
Control panels (46)
Solenoid interlock (227)
Position switch (824)
Safety sensors (235)
• RFID-technology for needs-based protection against tampering
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• Universal coding with RFID technology
• 1 x Pre-wired cable 8-pole
• Actuation from side
• Max. 31 sensors can be wired in series.
• RFID-technology for needs-based protection against tampering
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• Repeated individual coding with RFID technology
• Coding level "High" according to ISO 14119
• 1 x Pre-wired cable 8-pole
• Actuation from side
• Max. 31 sensors can be wired in series.
• Electronic contact-free, coded system
• Misaligned actuation possible
• 27 mm x 108.2 mm x 35 mm
• High repeat accuracy of the switching points
• Max. length of the sensor chain 200 m
• 2 short-circuit proof PNP safety outputs
• Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
• 1 x connector plug M12, 8-pole
• Actuation from top
• with edge monitoring of the reset pushbutton
• To control positive-guided relay without downstream safety monitoring module
• Suitable as individual or terminal device in series-wiring of standards sensors to replace a safety monitoring module
• Self-monitored series-wiring of up to 30 CSS 34 sensors and one CSS 34F0/F1 sensor for control category 4 to EN ISO 13849-1
• Non-contact safety switch
• Does not protrude into the door opening
• 119,5 mm x 140 mm x 43,3 mm
• Substitutes door-handle and safety switch, no further door fittings required
• Modern and symmetric design
• Tamper-proof because of integral coded safety sensor
• Ergonomic operation
• Suitable for hinged and sliding guards
• No protruding actuator
• Simple mounting with 4 Screws
• Pre-wired cable
• Non-contact safety switch
• Does not protrude into the door opening
• 119,5 mm x 140 mm x 43,3 mm
• Substitutes door-handle and safety switch, no further door fittings required
• Modern and symmetric design
• Tamper-proof because of integral coded safety sensor
• Ergonomic operation
• Suitable for hinged and sliding guards
• No protruding actuator
• Simple mounting with 4 Screws
• Pre-wired cable
• Long life
• no mechanical wear
• 40 mm x 112 mm x 40 mm
• Suitable for food processing industry
• Insensitive to transverse misalignment
• Insensitive to soiling
• Wiring compartment
• With integral evaluation
• 1 Cable entry M 20 x 1.5
• Non-contact safety switch
• Does not protrude into the door opening
• 119,5 mm x 140 mm x 43,3 mm
• Substitutes door-handle and safety switch, no further door fittings required
• Modern and symmetric design
• Tamper-proof because of integral coded safety sensor
• Ergonomic operation
• Suitable for hinged and sliding guards
• No protruding actuator
• Simple mounting with 4 Screws
• Pre-wired cable
• Long life
• no mechanical wear
• 40 mm x 112 mm x 40 mm
• Suitable for food processing industry
• Insensitive to transverse misalignment
• Insensitive to soiling
• Wiring compartment
• With integral evaluation
• 1 Cable entry M 20 x 1.5
• Long life
• no mechanical wear
• 40 mm x 112 mm x 40 mm
• Suitable for food processing industry
• Insensitive to transverse misalignment
• Insensitive to soiling
• Wiring compartment
• With integral evaluation
• 1 Cable entry M 20 x 1.5
• Long life
• no mechanical wear
• 40 mm x 112 mm x 40 mm
• Suitable for food processing industry
• Insensitive to transverse misalignment
• Insensitive to soiling
• Wiring compartment
• With integral evaluation
• 1 Cable entry M 20 x 1.5
• Long life
• no mechanical wear
• 40 mm x 112 mm x 40 mm
• Suitable for food processing industry
• Insensitive to transverse misalignment
• Insensitive to soiling
• Wiring compartment
• With integral evaluation
• 1 Cable entry M 20 x 1.5
• Cable connection suitable for the food industry
• Concealed mounting possible
• 88 mm x 27 mm x 14,5 mm
• Long life
• no mechanical wear
• Insensitive to soiling
• Insensitive to transverse misalignment
• Suitable for food processing industry
• Cable connection suitable for the food industry
• Concealed mounting possible
• 88 mm x 27 mm x 14,5 mm
• Long life
• no mechanical wear
• Insensitive to soiling
• Insensitive to transverse misalignment
• Suitable for food processing industry
• especially easy to clean through concealed threaded holes at the rear
• Stainless steel enclosure
• Cable connection suitable for the food industry
• Concealed mounting possible
• 88 mm x 27 mm x 14,5 mm
• Long life
• no mechanical wear
• Insensitive to soiling
• Insensitive to transverse misalignment
• Suitable for food processing industry
• Cable connection suitable for the food industry
• Concealed mounting possible
• 88 mm x 27 mm x 14,5 mm
• Long life
• no mechanical wear
• Insensitive to soiling
• Insensitive to transverse misalignment
• Suitable for food processing industry
• LED version
• especially easy to clean through concealed threaded holes at the rear
• LED version
• Thermoplastic enclosure
• Concealed mounting possible
• Insensitive to transverse misalignment
• 88 mm x 25 mm x 13 mm
• Long life
• no mechanical wear
• Insensitive to soiling
• AS-Interface Safety at Work available
• Individual contact outlet
• Concealed mounting possible
• Insensitive to transverse misalignment
• 88 mm x 25 mm x 13 mm
• Long life
• no mechanical wear
• Insensitive to soiling
• AS-Interface Safety at Work available
• Connector M8 x 1, 4-pole
• LED version
• Thermoplastic enclosure
• Concealed mounting possible
• Particularly suitable for sliding doors
• Insensitive to transverse misalignment
• 88 mm x 25 mm x 13 mm
• Long life
• no mechanical wear
• Insensitive to soiling
• AS-Interface Safety at Work available
• Concealed mounting possible
• Insensitive to transverse misalignment
• 88 mm x 25 mm x 13 mm
• Long life
• no mechanical wear
• Insensitive to soiling
• AS-Interface Safety at Work available
• Actuation from cable direction possible
• Particularly suitable for sliding doors
• Concealed mounting possible
• Insensitive to transverse misalignment
• 88 mm x 25 mm x 13 mm
• Long life
• no mechanical wear
• Insensitive to soiling
• AS-Interface Safety at Work available
• Individual contact outlet

Свяжитесь с нами
Если вы не нашли нужной информации на сайте или у вас остались вопросы по товарам, оставьте заявку на бесплатную консультацию, и мы вам перезвоним















Ответ от производителя может занять до 5 дней и более.

