Safe switching and monitoring Schmersal
Key transfer system (53)
Foot switch (6)
Enabling device (3)
Control panels (46)
Solenoid interlock (227)
Position switch (824)
Safety sensors (235)
• Suitable for all types of guard
• Suitable for all types of guard
• Suitable for all types of guard
• Suitable for all types of guard
• Controls 1 enabling circuit(s)
- 1 enabling contact(s) with each 2 relay contacts 24 V / 1 A DC
and 230 V / 3 A AC integrated
• Diagnostic interface: RS 232 through RJ-45
• Controls 2 enabling circuit(s)
- 2 enabling contact(s) with each 2 relay contacts 24 V / 1 A DC
and 230 V / 3 A AC integrated
• Diagnostic interface: RS 232 through RJ-45
• Latching handle
• Long life
• 40,5 mm x 114 mm x 38 mm
• High level of contact reliability with low voltages and currents
• 1 Cable entry M 20 x 1.5
• Actuating head rotated by 270°
• Thermoplastic enclosure
• no mechanical wear
• 40 mm x 90 mm x 39 mm
• Integrated AS-Interface
• Concealed mounting possible
• Long life
• Insensitive to transverse misalignment
• Insensitive to soiling
• AS-Interface LED and status display
• connector plug M12, bottom, 4-pole
• Thermoplastic enclosure
• no mechanical wear
• 40 mm x 90 mm x 39 mm
• Integrated AS-Interface
• Concealed mounting possible
• Long life
• Insensitive to transverse misalignment
• Insensitive to soiling
• AS-Interface LED and status display
• connector plug M12, bottom, 4-pole
• Latching handle
• Long life
• 40,5 mm x 114 mm x 38 mm
• High level of contact reliability with low voltages and currents
• 1 Cable entry M 20 x 1.5
• Actuating head rotated by 90°
• Non-contact safety switch
• Does not protrude into the door opening
• 119,5 mm x 140 mm x 43,3 mm
• Substitutes door-handle and safety switch, no further door fittings required
• Modern and symmetric design
• Tamper-proof because of integral coded safety sensor
• Ergonomic operation
• Suitable for hinged and sliding guards
• No protruding actuator
• Simple mounting with 4 Screws
• Connector M12 x 1, 8-pole
• Non-contact safety switch
• Does not protrude into the door opening
• 119,5 mm x 140 mm x 43,3 mm
• Substitutes door-handle and safety switch, no further door fittings required
• Modern and symmetric design
• Tamper-proof because of integral coded safety sensor
• Ergonomic operation
• Suitable for hinged and sliding guards
• No protruding actuator
• Simple mounting with 4 Screws
• Connector M12 x 1, 8-pole

Свяжитесь с нами
Если вы не нашли нужной информации на сайте или у вас остались вопросы по товарам, оставьте заявку на бесплатную консультацию, и мы вам перезвоним















Ответ от производителя может занять до 5 дней и более.

